< Back ×
My Vehicle Change Vehicle
2008 Cadillac STS
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac STS Throttle Body
PartNumber: 12615495
Product Specifications- Notes: STS, STS-V; 4.6L
- Other Names: Throttle Body
- Item Dimensions: 6.2 x 5.2 x 10.1 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12602800
- Part Description: 2008 Cadillac STS Throttle Body
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum | 8 Cyl 4.6 L GAS
$209.59 MSRP:$395.48You Save: $185.89 (48%)
Cardone Reman® Remanufactured Throttle Body for 2008 Cadillac STS
PartNumber: 67-3025Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: No
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 Cadillac STS Remanufactured Throttle Body
Vehicle Fitment- 2008 Cadillac STS | All Trims | 8 Cyl 4.6L
$94.83OEM (Genuine) 2008 Cadillac STS Throttle Body
PartNumber: 12616994
Product Specifications- Notes: STS, STS-V; 3.6L
- Other Names: Throttle Body
- Item Dimensions: 8.2 x 6.9 x 5.7 inches
- Item Weight: 2.10 Pounds
- Replaced by: 12694878
- Part Description: 2008 Cadillac STS Throttle Body
Vehicle Fitment- 2008 Cadillac STS | Base | 6 Cyl 3.6 L GAS
$200.92 MSRP:$379.12You Save: $178.20 (48%)
Cardone Reman® Remanufactured Throttle Body for 2008 Cadillac STS
PartNumber: 67-3027Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: Yes
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 Cadillac STS Remanufactured Throttle Body
Vehicle Fitment- 2008 Cadillac STS | All Trims | 8 Cyl 4.4L
$82.44OEM (Genuine) 2008 Cadillac STS Throttle Body
PartNumber: 12567376
Product Specifications- Notes: STS, STS-V; 4.4L
- Other Names: Throttle Body
- Item Dimensions: 7.6 x 7.0 x 6.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac STS Throttle Body
Vehicle Fitment- 2008 Cadillac STS | Base, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$125.22 MSRP:$236.28You Save: $111.06 (48%)
Cardone Reman® Remanufactured Throttle Body for 2008 Cadillac STS
PartNumber: 67-3019Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- E-Waste: Yes
- Gaskets Included: No
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 Cadillac STS Remanufactured Throttle Body
Vehicle Fitment- 2008 Cadillac STS | All Trims | 6 Cyl 3.6L
$94.17OEM (Genuine) 2008 Cadillac STS Throttle Body
PartNumber: 12694878
Product Specifications- Notes: STS, STS-V; 3.6L
- Other Names: Throttle Body
- Item Dimensions: 7.1 x 6.4 x 5.7 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12604075, 12616994, 12609009
- Part Description: 2008 Cadillac STS Throttle Body
Vehicle Fitment- 2008 Cadillac STS | Base | 6 Cyl 3.6 L GAS
$200.92 MSRP:$379.12You Save: $178.20 (48%)
Dorman® Throttle Body Assemblies for 2008 Cadillac STS
PartNumber: 977-314Product Specifications- Adjustable: No
- Bore Diameter: 2.835''
- Connector/Terminal Type: Blade
- Electrical Connection Type: Female/Blade
- Fuel Injectors Included: No
- Fuel System Type: Gas
- Gasket or Seal Included: No
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Inlet Diameter: 2.83''
- Inlet Quantity: 1
- Inlet Type: Non-Flanged
- Installation Hardware Included: No
- Outlet Diameter: 2.83''
- Outlet Quantity: 1
- Outlet Type: Flanged
- UPC: 019495280286
- Part Description: 2008 Cadillac STS Throttle Body Assemblies
Vehicle Fitment- 2008 Cadillac STS | All Trims | 6 Cyl 3.6L
$146.41
Spectra Premium® Fuel Injection Throttle Body for 2008 Cadillac STS
PartNumber: TB1044Product Specifications- UPC: 627785018343
- Part Description: 2008 Cadillac STS Fuel Injection Throttle Body
Vehicle Fitment- 2008 Cadillac STS | All Trims | 6 Cyl 3.6L
FAQ for Throttle Body Repair
Q: How to remove FCI Connectors?
A:
The procedure is to slide the lever lock forward while pressing down on the lever lock release tab, disconnect the connector from the component, locate the dress cover locking tabs at the corners of the dress cover, slide the terminal position assurance (TPA) up one notch on both ends of the connector the TPA is located underneath the wire dress cover, gently pull the wire out of the back of the connector, always remember never use force when pulling a terminal out of a connector.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the throttle body bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
02/11/2022Q: How to measure the voltage at a selected point in a circuit?
A:
The procedure is to disconnect the electrical harness connector for the circuit being tested, enable the circuit and/or system being tested, select the V (AC) or V (DC) position on the DMM, connect the positive lead of the DMM to the point of the circuit to be tested, connect the negative lead of the DMM to a good ground.
By Bob
GM Specialist
02/11/2022Q: How to inspect and clean the Throttle Body?
A:
The procedure is to remove the air cleaner intake duct, fully open the throttle valve, use a clean shop towel and Top Engine Cleaner GM P/N 1052626 or equivalent product to clean the throttle body bore and the throttle valve plate, install the air cleaner duct.
By Bob
GM Specialist
02/11/2022Q: What tools are required in the replacement procedure for AFL/EPC Connectors?
A:
J-38125 Terminal Repair Kit is required in the replacement procedure for AFL/EPC Connectors.
By Bob
GM Specialist
02/11/2022Q: How to remove Throttle Body Assembly (LP1, LY7)?
A:
The procedure is to turn the ignition off, remove the air cleaner intake duct, remove the throttle body electrical connector, unlock and reposition the wiring harness conduit, remove the throttle body bolts, and remove the throttle body and gasket.
By Bob
GM Specialist
02/11/2022Q: What tools are required when using Fused Jumper Wires?
A:
J36169-A Fused Jumper Wire is required when using Fused Jumper Wires.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when learning Idle?
A:
You should ensure the above conditions are met before performing this procedure. You should not perform this procedure if a throttle position (TP) sensor or other throttle actuator control (TAC) system DTCs are set other than P2176. The ECM will not perform the idle learn procedure with a DTC set.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when using Fused Jumper Wires?
A:
Afused jumper may not protect solid-state components from being damaged.
By Bob
GM Specialist
02/11/2022Q: How to remove JST Connectors?
A:
The procedure is to remove the connector from the component, locate the two indents of the terminal position assurance (TPA) located on the bottom of the connector body, raise the TPA on both sides of the connector, use the J 38125-12A tool to release the terminals by inserting the tool into the left side of the terminal release cavity as shown in the graphic.
By Bob
GM Specialist
02/11/2022See more FAQs (7)