Part Description: 2008 Cadillac STS Steering Column
More Info
Vehicle Fitment
2008 Cadillac STS | V | 8 Cyl 4.4 L GAS
FAQ for Steering Column Repair
Q: How to remove Steering Column Lock Control Module?
A:
The procedure is to remove the knee bolster, disconnect the electrical connectors to the steering column module, loosen the retaining screw on the steering column control module, and slide the control module out of the retaining bracket.
By Bob
GM Specialist
02/11/2022
Q: How to install Steering Column Lock Control Module?
A:
The procedure is to install the control module to the steering column and tighten the retaining screw, connect the electrical connectors on the steering column control module, install the knee bolster, and program the steering column control module.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the retaining screw securing the control module to the steering column?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What tools are required in the replacement procedure for Lower Intermediate Steering Shaft (without JL7)?
A:
J42640 Steering Column Anti-Rotation Pin is required in the replacement procedure for Lower Intermediate Steering Shaft (without JL7).
Q: How to center the steering angle sensor?
A:
The procedure is to align the front wheels forward, set the transmission in the park position, turn the ignition switch on, with the engine off, clear any DTCs that may be set, select Steering Angle Sensor Centering in the electronic brake control module (EBCM) Special Functions list, follow the scan tool directions to complete the centering procedure.