< Back ×
My Vehicle Change Vehicle
2008 Cadillac STS
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2008 Cadillac STS Pad Asm, Rear Seat Cushion (W/ Frame)
PartNumber: 19123042
Product Specifications- Other Names: Seat Cushion Pad
- Item Dimensions: 55.6 x 23.6 x 8.1 inches
- Item Weight: 13.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac STS Pad Asm, Rear Seat Cushion (W/ Frame)
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac STS Pad Asm, Driver Seat Cushion
PartNumber: 88952680
Product Specifications- Notes: W/O Vented Seat
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 23.4 x 20.2 x 6.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac STS Pad Asm, Driver Seat Cushion
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac STS Pad Asm, Driver Seat Cushion
PartNumber: 88992745
Product Specifications- Notes: W/Vented Seat
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 28.8 x 24.7 x 8.3 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac STS Pad Asm, Driver Seat Cushion
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Seat Cushion Pad Repair
Q: How to remove Rear Seat Cushion?
A:
The procedure is to push in and pull up on the front of the rear seat cushion, lift up and out on the seat cushion, and remove the rear seat cushion from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How many seat cushion frame nuts are required in the replacement procedure for Seat Cushion Frame?
A:
There are 2 seat cushion frame nuts required in the replacement procedure for Seat Cushion Frame.
By Bob
GM Specialist
01/11/2022Q: How many seat back cushion finish panel retainers are required in the replacement procedure for Seat Back Cushion Side Bolster Panel?
A:
There are 2 seat back cushion finish panel retainers required in the replacement procedure for Seat Back Cushion Side Bolster Panel.
By Bob
GM Specialist
01/11/2022Q: How many seat back finish panel retainers are required in the replacement procedure for Driver Seat and Passenger Seat Back Cushion Finish Panel?
A:
There are 2 seat back finish panel retainers required in the replacement procedure for Driver Seat and Passenger Seat Back Cushion Finish Panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Cushion?
A:
The procedure is to install the rear seat cushion into the vehicle, engage the center wire hook, on the back of the seat cushion, under the seat back frame, position the rear seat buckles in the slots of the rear seat cushion, push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat back frame nuts?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat cushion frame nuts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How many seat back frame nuts are required in the replacement procedure for Front Seat Back Frame?
A:
There are 4 seat back frame nuts required in the replacement procedure for Front Seat Back Frame.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for the Front Seat Back Cushion Cover and Cushion Pad replacement?
A:
The procedure is to remove the seat speaker grilles.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for the Rear Seat Cushion Cover and Pad replacement?
A:
The procedure is to remove the rear seat cushion.
By Bob
GM Specialist
01/11/2022See more FAQs (5)