< Back ×
My Vehicle Change Vehicle
2008 Cadillac STS
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Dorman® Fuel Feed Line for 2008 Cadillac STS
PartNumber: 904-006Product Specifications- Notes: Pump to Rail Pipe
- Color: Silver
- End 1 Hose Connector Type: Hose Barb
- End 2 Hose Connector Type: Hose Barb
- Grade Type: Standard
- Inside Diameter: 0.1''
- Length: 4.''
- Material: Stainless Steel
- Maximum Pressure: 75 PSI
- Outside Diameter: 0.2''
- UPC: 885484360402
- Part Description: 2008 Cadillac STS Fuel Feed Line
Vehicle Fitment- 2008 Cadillac STS | All Trims | 6 Cyl 3.6L
$66.94
FAQ for Fuel Line Repair
Q: What is the recommended torque for the high-pressure fuel pipe fitting a final pass?
A:
The recommended torque is 32 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the high-pressure fuel pipe fitting of a first pass?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel filter bracket bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Fuel Hoses/Pipes-Filter to Tank?
A:
The procedure is to remove the fuel tank, disconnect the fuel lines from the primary fuel tank module disconnect the hoses from the retaining feature at the fuel tank.
By Bob
GM Specialist
01/11/2022Q: How to install Fuel Pipe Shield?
A:
The procedure is to position the fuel pipe shield behind the high-pressure fuel pump, install the fuel pipe shield to the cylinder bolt, install the wiper transmission, install the fuel injection sight shield, and install the cross-vehicle brace.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel feed pipe bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove Fuel Pipe Shield?
A:
The procedure is to remove the cross vehicle brace, remove the fuel injection sight shield, remove the intake manifold insulator, remove the wiper transmission, remove the fuel pipe shield to intake manifold bolts, remove the fuel pipe shield to cylinder bolt, remove the fuel pipe shield from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the fuel pipe shield to the manifold?
A:
The recommended torque is 23 N.m (17 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Filter to Tank Fuel Hoses/Pipes?
A:
The procedure is to clean any contamination from the male pipe ends of the primary fuel tank module, connect the hoses to the retaining feature at the fuel tank, connect the fuel lines from the primary fuel tank module, and install the fuel tank.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolt securing the fuel pipe shield to the head?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (7)