< Back ×
My Vehicle Change Vehicle
2008 Cadillac STS
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Cadillac STS Side Sensor
PartNumber: 15140509
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10362740
- Part Description: 2008 Cadillac STS Side Sensor
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac STS Front Sensor
PartNumber: 15140510
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.3 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10362739
- Part Description: 2008 Cadillac STS Front Sensor
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What should be noticed in the replacement procedure for Inflatable Restraint Roof Side Rail Module-Left Side?
A:
You should not strike the door or the door pillar in the area of the side impact sensor (SIS). You should turn off the ignition and remove the key when performing service in the area of the SIS.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 2 bracket mounting bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the mounting fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 2 bolts securing the module to the seat?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for the Side Object Sensor Bracket?
A:
The procedure is to remove the side object sensor module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the side object sensor module bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install Inflatable Restraint Side Impact Sensor?
A:
The procedure is to remove any dirt, grease, or other impurities from the mounting surface, install the SIS to the center pillar, install the SIS mounting fasteners, install the harness connector to the SIS, install the CPA to the SIS harness connector, install the center pillar trim, move the seat to the original position, enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the mounting fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the SIS mounting fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be noticed in the removal procedure for Inflatable Restraint Front End Sensor?
A:
You should notice that the front-end sensor mounting fastener has left-handed threads.
By Bob
GM Specialist
01/11/2022See more FAQs (16)