< Back ×
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Walker Products® Vehicle Speed Sensor for 2008 Cadillac SRX
PartNumber: 240-1137Product Specifications- Notes: Output
- UPC: 724620154409
- Part Description: 2008 Cadillac SRX Vehicle Speed Sensor
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
$28.50
OEM (Genuine) 2008 Cadillac SRX Vehicle Speed Sensor
PartNumber: 24279827
Product Specifications- Notes: Srx; 6 Speed
- Other Names: Vehicle Speed Sensor
- Item Dimensions: 0.1 x 8.3 x 1.1 inches
- Item Weight: 13.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24238417, 24276175, 24265507, 24245141
- Part Description: 2008 Cadillac SRX Vehicle Speed Sensor
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$36.59 MSRP:$60.57You Save: $23.98 (40%)OEM (Genuine) 2008 Cadillac SRX Vehicle Speed Sensor
PartNumber: 96041860
Product Specifications- Notes: Srx; 5 Speed
- Other Names: Vehicle Speed Sensor
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Vehicle Speed Sensor
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
VEMO® Automatic Transmission Speed Sensor for 2008 Cadillac SRX
PartNumber: V20-72-0506Product Specifications- Notes: Grade: Aftermarket;Grade: Aftermarket; AT Input & Output SensorSpd
- Height [mm]: 70
- Length [mm]: 40
- Number of Poles: 2
- Packaging Depth [cm]: 6,8
- Packaging height [cm]: 6,7
- Packaging width [cm]: 4
- Transmission Type: for automatic transmission
- Weight [kg]: 0.020
- Width [mm]: 70
- Part Description: 2008 Cadillac SRX Automatic Transmission Speed Sensor
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
FAQ for Vehicle Speed Sensors Repair
Q: What is the recommended torque for the Input and Output Speed Sensor Assembly Bolt?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Output Speed Sensor?
A:
You should install the output speed sensor spacer, the output speed sensor, and the output speed sensor bolt, connect the electrical wiring harness connector to the output speed sensor and install the transmission fluid pan and filter.
By Bob
GM Specialist
01/11/2022Q: How to replace the Input and Output Speed Sensor?
A:
You should raise and support the vehicle, remove the transmission fluid pan and filter and the upper and lower valve body assembly and disconnect the speed sensor electrical connector from the control solenoid valve assembly. Then, you should disconnect the speed sensor wiring harness clips, inspect the clips for damage and replace them if damaged.
By Bob
GM Specialist
01/11/2022Q: How to remove the Input Speed Sensor?
A:
You should remove the transmission fluid pan and filter, disconnect the electrical wiring harness connector from the input speed sensor, remove the input speed sensor bolt and the input speed sensor and inspect the input speed sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Input Speed Sensor?
A:
You should install the input speed sensor and the input speed sensor bolt, connect the electrical wiring harness connector to the input speed sensor and install the transmission fluid pan and filter.
By Bob
GM Specialist
01/11/2022Q: How to remove the Output Speed Sensor?
A:
You should remove the transmission fluid pan and filter, disconnect the electrical wiring harness connector from the output speed sensor, remove the output speed sensor bolt, the output speed sensor, and the output speed sensor spacer and inspect the output speed sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (1)