< Back ×
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac SRX Assist Rod
PartNumber: 15211910
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Assist Rod, Lift Cylinder
- Item Dimensions: 28.6 x 2.1 x 1.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Assist Rod
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$62.47 MSRP:$94.25You Save: $31.78 (34%)
StrongArm® Hood Lift Support for 2008 Cadillac SRX
PartNumber: 4398Product Specifications- Body: 19.00
- BODY CONNECTION: ball socket (nylon) 10mm
- Brackets: No
- Compressed Length: 15.03
- Extended Length: 25.03
- Force: 30.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 16 degree
- Stroke: 10.00
- UPC: 845998003394
- Part Description: 2008 Cadillac SRX Hood Lift Support
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
$18.00
FAQ for Hood Lift Support Repair
Q: How to remove the Hood Open Assist Rod Stud?
A:
You should open and support the hood and remove the assist rod, the lower hood assist rod ball stud from the fender and the upper hood assist rod ball stud from the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Open Assist Rod Stud?
A:
You should install and tighten the upper assist rod ball stud to the hood, the lower ball stud to the fender, and the assist rod.
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Open Assist Rod?
A:
When a hood hold-open device is being removed or installed, you should provide alternate support to avoid the possibility of damage to the vehicle or personal injury and apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Then, you should open and support the hood, use a small flat-bladed tool to release the clip retaining the hood assist rod to the lower assist rod ball stud and the upper assist rod ball stud and remove the hood assist rod from the vehicle.
By Bob
GM Specialist
01/11/2022