2008 Cadillac SRX CV Joint Boot

You should place the wheel drive shaft horizontally in a bench vise, remove the large and small seal retaining clamp, separate and slide the seal away, wipe the grease, remove the outer joint, the axle shaft retaining ring, the seal, and the wheel drive shaft, place the outer race vertically in a bench vise, tap on the wheel drive shaft joints inner cage, remove the exposed ball, position the cage and inner race, repeat until all of the balls are removed, position the cage and the inner race 90 degrees to the centerline of the outer race, align the cage windows with the lands of the outer race, remove and position the cage and the inner race, rotate the inner race 90 degrees to the centerline of the cage, align the lands of the inner race with the windows of the cage, insert an inner race land into a cage window, pivot the inner race down and remove it and clean, dry and inspect all the parts.