2008 Cadillac SRX Blower Motor

You should remove the HVAC module, the Heater Core pipe bracket screw, the heater core pipe bracket, and the heater core from the HVAC module.

You should drain the cooling system, remove the battery tray, the cowl panel retaining bolts, and the cowl panel, use J 38185 to slide the clamp away from the base of the heater inlet hose, remove the inlet Heater Hose from the heater core, use J 38185 slide the clamp away from the base of the heater inlet hose and remove the clamp and hose from the engine cooling thermostat assembly.

You should recover the refrigerant, raise and support the vehicle, remove the front air deflector retainers, the front air deflector, the lower air baffle push pin retainers, the condenser upper bracket bolts, the condenser lower mounting bolts, and the discharge line bolt, disconnect the discharge line from the condenser, remove the O-ring and the condenser tube bolt, disconnect the condenser tube from the condenser and remove the O-ring, the power steering cooler line to condenser retaining bolts and the condenser.