< Back ×
My Vehicle Change Vehicle
2008 Cadillac Escalade ESV
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Prices
OEM (Genuine) 2008 Cadillac Escalade ESV Converter & Pipe
PartNumber: 19418958
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, Federal, 6.2 Liter
- Other Names: Catalytic Converter, Converter & Pipe
- Fitment Type: Direct Replacement
- Replaces: 25904626, 20854457, 25904629
- Part Description: 2008 Cadillac Escalade ESV Converter & Pipe
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$2145.06 MSRP:$3416.66You Save: $1271.60 (38%)
OEM (Genuine) 2008 Cadillac Escalade ESV Muffler & Pipe
PartNumber: 20757530
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, 6.2 Liter
- Other Names: Muffler, Muffler & Pipe
- Item Dimensions: 132.9 x 25.8 x 15.1 inches
- Item Weight: 243.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac Escalade ESV Muffler & Pipe
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2008 Cadillac Escalade ESV Converter & Pipe
PartNumber: 19420110
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, California, 6.2 Liter
- Other Names: Converter & Pipe
- Replaces: 25824122, 25904627, 20854458
- Part Description: 2008 Cadillac Escalade ESV Converter & Pipe
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
FAQ for Exhaust Pipe Repair
Q: How to install the Exhaust Seal?
A:
You can install the NEW exhaust seal(s), the catalytic converter assemblies, the catalytic converter, the exhaust pipe hanger bracket, the exhaust pipe hanger bracket bolts, the left front CPA retainer, the left rear CPA retainer, the right rear HO2S electrical connector clip, the right rear CPA retainer, the right front CPA retainer, the oil pan skid plate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Exhaust Seal?
A:
You can loosen the 2 rear oil pan skid plate bolts, remove the 2 front oil pad skid plate bolts and skid plate, remove the right front connector position assurance (CPA) retainer, the right rear CPA retainer, the right rear HO2S electrical connector clip from the engine harness clip, the left rear CPA retainer, the left front CPA retainer, the exhaust pipe hanger bracket bolts, the catalytic converter to exhaust manifold nuts, the exhaust seal(s).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for exhaust manifold nuts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the oil pan skid plate bolts?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Exhaust Muffler Insulator, Hanger, and Bracket?
A:
You can spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted, install the exhaust system insulator, the exhaust muffler assembly, spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted, install the exhaust system insulator.
By Bob
GM Specialist
29/10/2022Q: How to remove the Exhaust Muffler Insulator, Hanger, and Bracket?
A:
You can spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted, remove the exhaust system insulator, the exhaust muffler assembly, spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger is inserted, remove the exhaust system insulator.
By Bob
GM Specialist
29/10/2022Q: How to install the Exhaust Hanger Mounting Bracket?
A:
You can install the left and right catalytic converters, the exhaust pipe hanger bracket bolts, and the hanger.
By Bob
GM Specialist
29/10/2022Q: How to remove the Exhaust Hanger Mounting Bracket?
A:
You can remove the left and right catalytic converters, the exhaust pipe hanger bracket bolts, and the hanger.
By Bob
GM Specialist
29/10/2022See more FAQs (3)