< Back ×
My Vehicle Change Vehicle
2008 Cadillac Escalade ESV
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2008 Cadillac Escalade ESV Master Cylinder
PartNumber: 15844166
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.4 x 7.6 x 9.5 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432746
- Part Description: 2008 Cadillac Escalade ESV Master Cylinder
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
$72.11 MSRP:$220.34You Save: $148.23 (68%)
Centric® Premium Brake Master Cylinder for 2008 Cadillac Escalade ESV
PartNumber: 130.66056Product Specifications- Notes: exc Active Apply Brakes; Front Bracket Cast# 351C/352C
- UPC: 805890338291
- Part Description: 2008 Cadillac Escalade ESV Premium Brake Master Cylinder
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | All Engines
$83.39
Cardone Reman® Remanufactured Master Cylinder for 2008 Cadillac Escalade ESV
PartNumber: 10-3267Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.25"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder
- Port Quantity: 2
- Primary Port Size: M12 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617777971
- Part Description: 2008 Cadillac Escalade ESV Remanufactured Master Cylinder
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | All Engines
Centric® Premium™ Brake Master Cylinder for 2008 Cadillac Escalade ESV
PartNumber: 130.66065Product Specifications- Notes: Active Apply Brakes; Front Bracket Cast# 351C/352C
- UPC: 805890497820
- Part Description: 2008 Cadillac Escalade ESV Premium™ Brake Master Cylinder
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the recommended torque for the brake master cylinder right supply brake pipe fitting?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake pushrod retainer bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake master cylinder right front brake pipe fitting?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 4 brake pedal bracket nuts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should I notice in Master Cylinder Reservoir filling?
A:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container. The use of any type of fluid other than the recommended type of brake fluid may cause contamination which could result in damage to the internal rubber seals and/or rubber linings of hydraulic brake system components.
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder Reservoir?
A:
You can apply the park brake and block the wheels, remove the master cylinder, drain the master cylinder reservoir, secure the master cylinder in a vise, remove the brake fluid level sensor by carefully depressing the retaining tabs and pushing the sensor through the reservoir, the reservoir retaining pins, the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder, the seals from the master cylinder.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for 2 new master cylinder nuts?
A:
The recommended torque is 33 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake master cylinder left supply brake pipe fitting?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Master Cylinder Reservoir?
A:
You can dry the reservoir with non-lubricated, filtered air, lubricate the new seals and the outer surface area of the reservoir-to-housing barrels with Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667) or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container, install the lubricated seals, the reservoir to the master cylinder by pressing the reservoir straight down on the master cylinder until the pin holes are aligned, the reservoir retaining pins to secure the reservoir, place the brake fluid level sensor into the reservoir, press into place to secure the sensor retaining tabs, remove the master cylinder from the vice, install the master cylinder, release the parking brake, bleed the hydraulic brake system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake master cylinder left front brake pipe fitting?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (6)