< Back ×
My Vehicle Change Vehicle
2008 Cadillac Escalade ESV
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac Escalade ESV Axle Seal
PartNumber: 12471686
Product Specifications- Notes: 1/2 Ton
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: 2008 Cadillac Escalade ESV Axle Seal
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$11.79 MSRP:$21.32You Save: $9.53 (45%)
Centric® Premium™ Axle Shaft Seal for 2008 Cadillac Escalade ESV
PartNumber: 417.62001Product Specifications- Notes: Centric Premium Oil & Grease Seal; Front Bracket Cast# 351C/352C
- UPC: 805890575191
- Part Description: 2008 Cadillac Escalade ESV Premium™ Axle Shaft Seal
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | All Engines
$1.27
SKF® Axle Shaft Seal for 2008 Cadillac Escalade ESV
PartNumber: 12470Product Specifications- Bore: 2.407"
- Boretite: No
- Outside Diameter: 2.412"
- Shaft: 1.248"
- UPC: 085311523684
- Width: 0.445"
- Part Description: 2008 Cadillac Escalade ESV Axle Shaft Seal
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | All Engines
$10.91
FAQ for Axle Shaft Seal Repair
Q: What should I notice in Rear Axle Hub, Bearing, Cup, and/or Seal removal procedure?
A:
The wheel hub seal must be replaced anytime the wheel hub assembly is removed from the axle housing.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the axle shaft bolt?
A:
The recommended torque is 156 N.m (115 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What should I notice in Rear Axle Hub, Bearing, Cup, and/or Seal installation procedure?
A:
When installing the outer bearing assembly, ensure that the bearing assembly is below the retaining ring groove. DO NOT bottom out the bearing assembly in the bore. Ensure that the retaining ring is fully seated in the groove. After installing the outer bearing assembly, ensure that the bearing rotates freely in the wheel hub. The rubber outer sealing rings of the oil seal must be driven into the wheel hub first.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the wheel drive shaft?
A:
The recommended torque is 79 N.m (58 lb-ft).
By Bob
GM Specialist
28/10/2022