Part Description: 2008 Cadillac DTS Arm Asm-Windshield Wiper
More Info
Vehicle Fitment
2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What's the tip for replacing the windshield washer arm assembly?
A:
You may slightly rock the arm on the wiper pivot shaft to remove it.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the windshield washer transmission support nut?
A:
The recommended torque is 32 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What's the preliminary procedure for replacing the windshield wiper arm?
A:
The procedure is to remove the wiper arm blades.
By Bob
GM Specialist
01/11/2022
Q: What's the tip for replacing the windshield wiper arm hose?
A:
You may disconnect the hose from the air inlet grille panel elbow.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the tip for replacing the windshield washer pump?
A:
You may use 2 flat-bladed tools and pry upward to release the Washer Pump from the washer solvent container grommet, then discard the old washer pump grommet.
Q: What's the tip for replacing the windshield washer element assembly?
A:
You may secure the end of the wiper element with a small pair of needle nose pliers, and pull outward from the Wiper Blade claws to remove the element.
Q: What's the tip for replacing the windshield washer level sensor grommet?
A:
You may discard the old level sensor grommet, install a new grommet into the washer solvent container before installing the new level sensor, and then lubricate the new grommet with straight washer fluid.