< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Anchor® Transmission Mount for 2008 Cadillac DTS
PartNumber: 3153Product Specifications- Notes: AT;
- Bracket Included: YES
- Bracket Material: Steel
- Bushing Material: Rubber
- Color: Black
- Hardware Included: NO
- Installation Instructions Included: NO
- Installation Tools Included: NO
- Material: Steel and Rubber
- OE Part Number: 15294486
- Quantity: 1
- Type: OE Equivalent
- UPC: 081106031532
- Part Description: 2008 Cadillac DTS Transmission Mount
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
$24.15
Westar® Automatic Transmission Mount for 2008 Cadillac DTS
PartNumber: EM-3153Product Specifications- UPC: 656591031536
- Part Description: 2008 Cadillac DTS Automatic Transmission Mount
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
$29.78
OEM (Genuine) 2008 Cadillac DTS Transmission Mount
PartNumber: 20760909
Product Specifications- Notes: Dts
- Other Names: Transmission Mount
- Item Dimensions: 9.4 x 6.6 x 4.5 inches
- Item Weight: 3.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25886567, 15294486
- Part Description: 2008 Cadillac DTS Transmission Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Transmission Mount Repair
Q: How to remove the Transmission Rear Mount Bracket?
A:
You will need to raise and support the vehicle, support the engine assembly with a suitable jack, remove the nuts securing the transmission mount to the transmission mount bracket, raise the jack allowing the engine assembly to lift from the engine frame slightly, then remove the transmission mount bracket mounting bolts and the transmission mount bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the Transmission Brace?
A:
You will need to remove the right front wheel, the heat shield fasteners, the heat shield, the brace fasteners, and the brace.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the left transmission mount bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Transmission Rear Mount?
A:
You will need to raise and support the vehicle, support the engine assembly with a suitable jack, then remove the nuts securing the transmission mount to the transmission mount bracket, then raise the jack allowing the engine assembly to lift from the engine frame slightly, remove the bolts and one nut securing the mount to the frame, finally remove the mount.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the left transmission mount bracket bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the preliminary procedure for replacing the Left Side Transmission Mount Bracket?
A:
The procedure is to raise the vehicle and support the powertrain with a suitable jack.
By Bob
GM Specialist
01/11/2022Q: How to install the Transmission Rear Mount Bracket?
A:
You may need to install the transmission mount bracket and mounting bolts and tighten the bolts to 110 N.m (89 lb-ft), then lower the transmission in position, install the nuts to the mount and mount bracket and tighten the mount nut to 75 N.m (55 lb-ft), then remove the engine assembly support jack and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the left transmission mount nuts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Transmission Brace?
A:
You may need to install the engine to transaxle brace, install the fasteners into the engine and transmission and tighten the brace bolts to 50 N.m (37 lb-ft), install the heat shield and the heat shield fasteners, then tighten the heat shield nuts to 50 N.m (37 lb-ft), next install the right front tire.
By Bob
GM Specialist
01/11/2022Q: How to install the Transmission Rear Mount?
A:
You may need to install the mount, install the mount attaching bolts and nut securing the mount to the frame, and tighten the bolts and nut to 50 N.m (37 lb-ft), then lower the transmission in position, install the nuts to the mount and mount bracket and tighten the mount nut to 50 N.m (37 lb-ft), next remove the engine assembly support jack, finally lower the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (5)