< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Engine Mounts & Mounting Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac DTS Strut Asm-Engine Mount
PartNumber: 20760911
Product Specifications- Other Names: Front Mount, Strut Mount
- Item Dimensions: 18.9 x 4.9 x 4.9 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25749806
- Part Description: 2008 Cadillac DTS Strut Asm-Engine Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$45.92 MSRP:$68.51You Save: $22.59 (33%)
Anchor® Rear Engine Mount for 2008 Cadillac DTS
PartNumber: 3320Product Specifications- Notes: Hyd;PART GROUP: 3140, 3166, 3320;
- Note: HYDRAULIC
- PART GROUP: 3140, 3166, 3320
- UPC: 081106033208
- Part Description: 2008 Cadillac DTS Rear Engine Mount
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
$55.40
Westar® Front Engine Mount for 2008 Cadillac DTS
PartNumber: EM-3166Product Specifications- UPC: 656591031666
- Part Description: 2008 Cadillac DTS Front Engine Mount
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
$27.08
Anchor® Front Engine Mount for 2008 Cadillac DTS
PartNumber: 3166Product Specifications- Notes: Hyd;PART GROUP: 3140, 3166, 3320;
- Note: HYDRAULIC
- PART GROUP: 3140, 3166, 3320
- UPC: 081106031662
- Part Description: 2008 Cadillac DTS Front Engine Mount
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
$22.31
OEM (Genuine) 2008 Cadillac DTS Rear Mount
PartNumber: 20760907
Product Specifications- Notes: Dts; Rear
- Other Names: Mount, Rear Mount
- Item Dimensions: 7.8 x 5.4 x 5.6 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15817836
- Part Description: 2008 Cadillac DTS Rear Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Front Mount
PartNumber: 20760905
Product Specifications- Notes: Dts; Front
- Other Names: Front Mount, Mount
- Item Dimensions: 17.2 x 9.7 x 8.2 inches
- Item Weight: 9.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Front Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Bracket-Engine Mount Strut Body Side
PartNumber: 25749805
Product Specifications- Notes: Body Side
- Other Names: Strut Bracket, Strut Mount Bracket
- Item Dimensions: 13.4 x 8.6 x 2.6 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Bracket-Engine Mount Strut Body Side
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Bracket-Engine Mount Strut Engine Side
PartNumber: 25749802
Product Specifications- Notes: Engine Side
- Other Names: Strut Bracket, Strut Mount Bracket
- Item Dimensions: 11.2 x 4.5 x 2.4 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Bracket-Engine Mount Strut Engine Side
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Bracket-Engine Rear Mount
PartNumber: 15279196
Product Specifications- Other Names: Rear Mount Bracket
- Item Dimensions: 4.7 x 3.5 x 10.9 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Bracket-Engine Rear Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Bracket-Engine Front Mount
PartNumber: 25749797
Product Specifications- Other Names: Front Mount Bracket, Front Mount Bracket Bracket
- Item Dimensions: 5.7 x 2.3 x 1.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Bracket-Engine Front Mount
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Brace-Transaxle
PartNumber: 12593802
Product Specifications- Other Names: Front Mount Brace, Front Mount Bracket Brace
- Item Dimensions: 10.7 x 1.9 x 2.7 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Brace-Transaxle
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Engine Mount Repair
Q: How to remove the Engine Mount Strut-Right Side?
A:
You will need to remove the surge tank nuts and push pin retainer, remove the surge tank from the studs and position the tank aside, then remove the engine mount strut bolt and the engine mount strut.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the right engine mount strut bracket?
A:
The removal procedure is to remove the engine mount strut, remove the right front wheel and tire, remove the engine mount strut bracket bolts, the strut bracket nut, the strut bracket bolt, the strut bracket nuts, the strut bracket bolts, and the strut bracket, then remove the engine mount strut bracket to engine bolts and the engine mount strut bracket.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the right engine mount strut bracket?
A:
The installation procedure is to position the engine mount strut bracket to the cylinder head, install the engine mount strut bracket to engine bolts and tighten the bolts to 50 N.m (37 lb-ft), position the engine mount strut bracket to the front compartment rail, install the strut bracket bolts, the strut bracket bolt and the strut bracket nu, then tighten the nut to 70 N.m (52 lb-ft), install the strut bracket nuts, tighten the nuts to 70 N.m (52 lb-ft), install the strut bracket bolts, and tighten the bolts to 6 N.m (53 lb in), then install the right front wheel and tire, finally install the engine mount strut.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the right engine mount?
A:
The installation procedure is to install the right engine mount stud through the hole in the engine mount bracket, install the right engine mount to the engine mount bracket nut and tighten the nut to 80 N.m (59 lb-ft), then install the frame.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Mount Strut-Right Side?
A:
You may need to install the engine mount strut, install the engine mount strut bolt, tighten the bolt to 70 Nm (52 lb-ft), position the surge tank to the studs, install the surge tank nuts and push-pin retainer and then tighten the nuts to 6 Nm (53 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Front Mount Bracket?
A:
You will need to remove the front frame, the engine mount bracket to cylinder head bolts, the upper engine mount bracket to lower engine mount bracket nuts, the upper engine mount bracket, the transaxle brace bolt, the lower engine mount bracket to engine stud nuts, the transaxle brace, and the lower engine mount bracket.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the right engine mount?
A:
The removal procedure is to remove the frame, remove the right engine mount to the engine mount bracket nut, and remove the right engine mount.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Front Mount Bracket?
A:
You may need to install the lower engine mount bracket onto the engine studs and the transaxle brace, install the lower engine mount bracket to engine stud nuts finger tight, install the transaxle brace bolt, tighten the transaxle brace bolt to 50 N.m (37 lb-ft), tighten the lower engine mount bracket to engine stud nuts to 50 N.m (37 lb-ft), install the upper engine mount bracket onto the studs and the engine mount bracket to cylinder head bolts, tighten the bolts to 50 N.m (37 lb-ft), install the upper engine mount bracket to lower engine mount bracket nuts, tighten the nuts to 50 N.m (37 lb-ft), and finally install the front frame.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the front engine mount?
A:
The installation procedure is to install the front engine mount stud through the hole in the front engine mount bracket, install the front engine mount bracket, and install the front engine mount to the engine mount bracket nut, then tighten the nut to 80 N.m (59 lb-ft), and install the frame.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the right engine mount bracket?
A:
The removal procedure is to remove the right engine mount, remove the right engine mount bracket to the engine stud, remove the right engine mount bracket to transaxle bolts, and remove the right engine mount bracket.
By Bob
GM Specialist
01/11/2022See more FAQs (7)