< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2008 Cadillac DTS CV Joints
PartNumber: 26075588
Product Specifications- Notes: Dts; W/O Heavy Duty
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.5 x 7.1 x 6.6 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS CV Joints
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$383.97 MSRP:$609.63You Save: $225.66 (38%)
OEM (Genuine) 2008 Cadillac DTS CV Joints
PartNumber: 26075594
Product Specifications- Notes: Dts; W/Heavy Duty
- Other Names: CV Joint, Inner Joint Assembly
- Item Dimensions: 8.9 x 6.7 x 7.1 inches
- Item Weight: 7.20 Pounds
- Part Description: 2008 Cadillac DTS CV Joints
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$467.76 MSRP:$742.67You Save: $274.91 (38%)
OEM (Genuine) 2008 Cadillac DTS Outer CV Joint
PartNumber: 20984613
Product Specifications- Notes: Dts; W/O Heavy Duty
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Outer CV Joint
- Item Dimensions: 6.2 x 6.2 x 26.3 inches
- Item Weight: 16.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15869612, 26075603, 20859675
- Part Description: 2008 Cadillac DTS Outer CV Joint
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Joint Kit, Front Wheel Drive Shaft C/V
PartNumber: 19149663
Product Specifications- Notes: Dts; W/Heavy Duty
- Other Names: Outer CV Joint
- Item Dimensions: 12.8 x 6.8 x 6.9 inches
- Item Weight: 7.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Joint Kit, Front Wheel Drive Shaft C/V
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Outer Joint Assembly
PartNumber: 25766430
Product Specifications- Notes: Dts; W/O Heavy Duty
- Location: Driver Side; Passenger Side
- Other Names: Outer CV Joint
- Part Description: 2008 Cadillac DTS Outer Joint Assembly
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Cv Joint Repair
Q: What's the recommended torque for the seal retaining clamp?
A:
The recommended torque is 174 N.m (130 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when you slide the large diameter of the outboard boot with the large boot retaining clamp in place over the outside of the CV joint outer race?
A:
You will need to make sure the outboard boot must not dimpled, stretched, or out of shape in any way. If the boot is not shaped correctly, equalize the pressure in the boot and shape the boot properly by hand.
By Bob
GM Specialist
01/11/2022Q: What items should be aligned while latching?
A:
You can align the following items while latching including the half shaft inboard seal, the tripot housing, and the large seal retaining clamp.
By Bob
GM Specialist
01/11/2022Q: What tools are needed to replace the Wheel Drive Shaft Inner Joint and Boot (FE7)?
A:
You will need J 8059 Snap Ring Pliers (Parallel Jaw) and J 35910 Drive Axle Seal Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Wheel Drive Shaft Inner Joint and Boot (FE1/FE3)?
A:
With the removal of the half shaft for any reason, the transmission sealing surface (the tripot male/female shank of the half shaft) should be inspected for corrosion. If corrosion is evident, the surface should be cleaned with 320 grit cloth or equivalent in a rotation motion. You should not clean with an oscillating motion. Transmission fluid may be used to clean off any remaining debris. The surface should be wiped dry and the half shaft reinstalled free of any buildup.
By Bob
GM Specialist
01/11/2022Q: What tools are needed to replace the Wheel Drive Shaft Outer Joint and Boot (FE1/FE3)?
A:
You will need J 8059 Snap Ring Pliers, J 35910 Drive Axle Seal Clamp Pliers, and J 41048 Drive Axle Swage Ring Clamps.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the eared clamp?
A:
The recommended torque is 136 N.m (100 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What tools are needed to replace the Wheel Drive Shaft Inner Joint and Boot (FE1/FE3)?
A:
You will need J 8059 Snap Ring Pliers, J 35910 Drive Axle Seal Clamp Pliers, and J 41048 Drive Axle Swage Ring Clamps.
By Bob
GM Specialist
01/11/2022Q: What tools are needed to replace the Wheel Drive Shaft Outer Joint and Boot (FE7)?
A:
You will need DT-48267 Drive Axle Swage Ring Clamp, J 8059 Snap Ring Pliers, and J 35910 Drive Axle Seal Clamp Pliers.
By Bob
GM Specialist
01/11/2022See more FAQs (4)