< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac DTS Negative Cable
PartNumber: 22743866
Product Specifications- Other Names: Negative Cable
- Item Dimensions: 11.4 x 11.3 x 3.7 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20875875, 25844842
- Part Description: 2008 Cadillac DTS Negative Cable
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$53.28 MSRP:$100.54You Save: $47.26 (48%)
Deka® Positive Battery Cable for 2008 Cadillac DTS
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2008 Cadillac DTS Positive Battery Cable
Vehicle Fitment- 2008 Cadillac DTS | All Trims | 8 Cyl 4.6L
OEM (Genuine) 2008 Cadillac DTS Cable Asm-Battery Positive
PartNumber: 20977459
Product Specifications- Other Names: Positive Cable
- Item Dimensions: 4.0 x 11.6 x 11.2 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20875872, 25844843
- Part Description: 2008 Cadillac DTS Cable Asm-Battery Positive
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Cable Asm-Battery Negative
PartNumber: 15861663
Product Specifications- Notes: Dts
- Other Names: Negative Cable
- Item Dimensions: 12.9 x 6.4 x 2.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15830652
- Part Description: 2008 Cadillac DTS Cable Asm-Battery Negative
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Battery Cables Repair
Q: What's the recommended torque for the positive battery cable nut installed to the junction block stud?
A:
The recommended torque is 15 N.m (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable?
A:
You will need to disconnect the negative battery cable, disconnect the body harness electrical connector from the negative battery cable electrical connector, and disconnect the body harness electrical connector from the battery current sensor, then remove the negative battery cable ground bolt and the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What should you attach importance to when replacing the Engine Ground Cable?
A:
You should always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing, and always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: What should you attach importance to when replacing the Battery Negative Cable?
A:
You should always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing, and always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Ground Cable?
A:
You will need to remove the front compartment sight shield, remove the bolt securing the engine ground cable to the right side body frame rail, and remove the rear generator bolt and the engine ground cable.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Ground Cable?
A:
You may need to position the engine ground cable to the generator, install the rear generator bolt, then tighten the bolt to 50 N.m (37 lb-ft), next install the bolt securing the engine ground cable to the right side body frame rail, tighten the bolt to 25 N.m (18 lb-ft), then install the front compartment sight shield.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the nut securing the starter solenoid cable to the BEC?
A:
The recommended torque is 15 N.m (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the Battery Positive Cable?
A:
You will need to always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing, and always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the negative battery cable ground bolt?
A:
The recommended torque is 36 N.m (27 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (4)