< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Air Suspension
- Department
- Prices
OEM (Genuine) 2008 Cadillac DTS Compressor Asm-Rear Air Spring
PartNumber: 20827740
Product Specifications- Other Names: Compressor
- Item Dimensions: 20.4 x 14.4 x 10.2 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25994396, 15886734
- Part Description: 2008 Cadillac DTS Compressor Asm-Rear Air Spring
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Compressor Asm-Auto Level Control Air
PartNumber: 25806015
Product Specifications- Other Names: Compressor, Compressor Assembly
- Item Dimensions: 14.6 x 12.4 x 6.8 inches
- Item Weight: 7.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15811960
- Part Description: 2008 Cadillac DTS Compressor Asm-Auto Level Control Air
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Air Suspension Compressor Repair
Q: Can I install the fourth heat shield bolt after installing the heat shield on the air compressor bracket with 3 bolts?
A:
No, you can't. It must be installed after the air tube is connected.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the nuts?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the heat shield bolt?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be done before disconnecting the air hose from the intake air filter or the air compressor?
A:
You will need to clean the components and the surrounding area to prevent dirt and other foreign material from entering the ALC system.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the nuts and bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be done before disconnecting the air hoses from the intake air filter or the air compressor?
A:
You will need to clean the components and the surrounding area to prevent dirt and other foreign material from entering the ECAS (Electronically Controlled Air Suspension) system.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Spring Compressor?
A:
You may need to install the air compressor with the dryer to the bracket, install the air compressor nuts and washers, connect the air hose to the air dryer, install the air compressor assembly, pressurize the air suspension system after the repair has been completed.
By Bob
GM Specialist
01/11/2022Q: Can I remove an air supply pipe in an attempt to depressurize the air suspension?
A:
No, you cannot. You should always follow the Air Suspension Depressurization Procedure, and failure to follow this procedure may cause personal injury or damage to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Spring Compressor?
A:
You will need to depressurize the air suspension system, remove the air compressor assembly, disconnect the air hose from the air dryer, remove the air compressor nuts and washers, then remove the air compressor with the dryer from the bracket.
By Bob
GM Specialist
01/11/2022See more FAQs (4)