< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Cadillac DTS Clock Spring
PartNumber: 19180232
Product Specifications- Notes: W/Heated Str Wheel
- Other Names: Clock Spring
- Item Dimensions: 6.0 x 5.0 x 4.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15231661
- Part Description: 2008 Cadillac DTS Clock Spring
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$264.35 MSRP:$398.73You Save: $134.38 (34%)OEM (Genuine) 2008 Cadillac DTS Clock Spring
PartNumber: 15231662
Product Specifications- Notes: W/O Heated Str Wheel
- Other Names: Clock Spring
- Item Dimensions: 5.9 x 5.4 x 5.1 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Clock Spring
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Air Bag Clockspring Repair
Q: What should be verified before coiling the SIR coil?
A:
You will need to verify the following conditions including that the wheels on the vehicle are straight ahead, the block tooth of the steering shaft assembly is in the 12 o'clock position, and the ignition switch assembly is in the LOCK position.
By Bob
GM Specialist
01/11/2022Q: What's the tip for replacing the inflatable restraint steering wheel module coil?
A:
You may ensure the inflatable restraint steering wheel module coil washer doesn't need to be replaced and is installed correctly before reinstalling the coil. If reusing the inflatable restraint steering wheel module coil, you must center it before reinstalling it.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the inflatable restraint steering wheel module coil?
A:
The new SIR coil assembly will be centered. Improper alignment of the SIR coil assembly may damage the unit, causing an inflatable restraint malfunction.
By Bob
GM Specialist
01/11/2022Q: What's the preliminary procedure for replacing the inflatable restraint steering wheel module coil?
A:
The procedure is to remove the steering column trim covers.
By Bob
GM Specialist
01/11/2022Q: What should be done if no centering window appears on the front side of the SIR coil and no spring service lock exists on the back side?
A:
You will need to hold the coil face-up, rotate the coil hub in the direction of the arrow until the coiled ribbon stops, then rotate the coil hub, slowly, counterclockwise, for 21/2 revolutions, which is the CENTER position. While maintaining the coil hub in the CENTER position, align the centered coil with the horn tower and slide the coil onto the steering shaft assembly.
By Bob
GM Specialist
01/11/2022