2008 Cadillac CTS Steering Knuckle

First, you need to remove the tire and wheel and remove the wheel bearing/hub. Then, please remove the outer tie rod to the steering knuckle and remove the brake hose bracket to the steering knuckle retaining bolts. Finally, you should remove the steering knuckle from the upper control arm and remove the steering knuckle lower from the control arm.

First, you need to install the steering knuckle to the lower control arm and the upper control arm. Then, please install the brake hose bracket to the steering knuckle retaining bolts and install the outer tie rod to the steering knuckle. Finally, you should install the wheel bearing/hub and the tire and wheel.

First, you need to remove the tire and wheel assembly, remove the rear park brake cable from the brake rotor, and remove the park brake backing plate and the adjustable link. Then, please position a suitable jack stand under the lower control arm. Finally, you should remove the upper ball joint, the lower shock absorber bolt from the knuckle, remove the bolt from the lower trailing arm to the knuckle, remove the bolt from the lower control arm to the knuckle and remove the knuckle from the vehicle.

First, you need to position the knuckle on the lower control arm. Then, please install the lower control bolt and the upper ball joint in the knuckle and install the lower shock absorber bolt, the trailing arm bolt, and the adjustable link. Finally, you should remove the jack stand from the lower control arm, install the park brake backing plate, the park brake cable, and the tire and wheel.