2008 Cadillac CTS Seat Cushion Pad

You need to remove the front seat, the front seat adjuster switch bezel, the front seat inner recliner finish cover, and the front seat recliner handle bezel bracket.

You need to pull the panel rearward at the bottom edge first to disengage the lower retainers. Then, please pull rearward and tilt the bottom of the panel upward to disengage the middle retailers. Finally, you should slide the panel downward to release the upper hooks from the seat back frame.

You need to separate the rear seat cushion cover from the pad.

First, you need to push in and pull up on the front of the rear seat cushion. Then, please lift up and out on the seat cushion. Finally, you should remove the rear seat cushion from the vehicle.

First, you need to install the rear seat cushion into the vehicle and engage the center wire hook, on the back of the seat cushion, under the seat back frame. Then, please position the rear seat buckles in the slots of the rear seat cushion. Finally, you should push down and rearward to seat the rear seat cushion into the latches in the number 4 bar and pull up on the front of the rear seat cushion to ensure that the cushion is secure.