< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
Cameras & Driver Safety
- Department
- Prices
OEM (Genuine) 2008 Cadillac CTS Reverse Sensor
PartNumber: 20914917
Product Specifications- Notes: Cts
- Other Names: Reverse Sensor, Sensor
- Item Dimensions: 2.6 x 1.8 x 1.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19116009
- Part Description: Reverse Sensor
$190.56 MSRP:$287.49You Save: $96.93 (34%)
FAQ for Parking Sensors Repair
Q: How to install the Rear Object Sensor Housing?
A:
First, you need to apply structural adhesive epoxy, Lord Fusor(TM) 127EZ or equivalent, to the fascia at the mating surface. Then, please use the alignment tabs to install the sensor housing to the fascia and allow the adhesive to cure according to the manufacturer's directions. Finally, you should install the sensor to the sensor housing and connect the electrical harness and install the rear fascia.
By Bob
GM Specialist
02/11/2022Q: How to install the Rear Object Sensor?
A:
First, you need to paint the rear object sensor and ensure the paint does not exceed 6 mils. Then, please insert the sensor into the housing and connect the electrical connector to the rear object sensor. Finally, you should install the rear bumper fascia.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor?
A:
First, you need to remove the rear bumper fascia. Then, please disconnect the electrical from the rear object sensor. Finally, you should lift the locking tabs on the housing and remove the rear object sensor.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor Housing?
A:
First, you need to remove the rear fascia, disconnect the sensor harness and remove the sensor from the sensor housing. Then, the sensor housing must be painted if replaced but painting will not be necessary if reinstalled. Finally, you should sand or grind sonic weld plastic residue from the fascia.
By Bob
GM Specialist
02/11/2022