FAQ for Door Seal Repair
Q: What is the recommended quantity of the Front Side Door Upper Auxiliary Weatherstrip Retainer?
A:
16 Retainers are needed.
By BobGM Specialist
01/11/2022 Q: What will need to be done before the Rear Door Opening Weatherstrip Replacement?
A:
You need to remove the rear door sill plate.
By BobGM Specialist
01/11/2022 Q: How to replace the Front Side Door Upper Auxiliary Weatherstrip?
A:
First, you need to remove the auxiliary weatherstrip from the upper door frame. Then, please ensure that the auxiliary weatherstrip is fully seated in the upper door frame. Finally, you should verify proper window operation.
By BobGM Specialist
01/11/2022 Q: What is important in the procedure of the Front Side Door Bottom Auxiliary Sealing Strip Replacement?
A:
You should place the door in a fully open position to remove the retainers.
By BobGM Specialist
01/11/2022 Q: How to replace the Rear Side Door Upper Auxiliary Weatherstrip?
A:
First, you need to remove the auxiliary weatherstrip from the upper door frame. Then, please ensure that the auxiliary weatherstrip is fully seated in the upper door frame. Finally, you should verify proper window operation.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Rear Side Door Bottom Auxiliary Sealing Strip?
A:
You should place the door in a fully open position to remove the retainers.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the
A:
The recommended torque is N.m (lb in).
By BobGM Specialist
01/11/2022 Q: How to replace the Rear Side Door Opening Weatherstrip?
A:
First, you need to start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange. Then, please position the weatherstrip in the upper corner of the center pillar and install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners. Finally, you should use a rubber mallet to ensure that the weatherstrip is seated on the entire door opening flange.
By BobGM Specialist
01/11/2022 Q: What will need to be done before the Front Door Opening Weatherstrip Replacement?
A:
You need to remove the front door sill plate.
By BobGM Specialist
01/11/2022 Q: How to install the Front Door Opening Weatherstrip?
A:
First, you need to start at the rear corner of the door opening and pull the weatherstrip away from the door opening flange. Then, please position the weatherstrip in the upper corner of the central pillar and install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners. Finally, you should use a rubber mallet to ensure that the weatherstrip is seated on the entire door opening flange.
By BobGM Specialist
01/11/2022 See more FAQs (5)