2008 Cadillac CTS Blower Motor

First, you need to remove the HVAC module. Then, please remove the heater hose bracket screw and the heater hose bracket. Finally, you should slide the Heater Core out of the HVAC module.

First, you should disconnect the ambient Air Temperature Sensor electrical connector. Then, please release the ambient air temperature sensor from the clip. Finally, you can remove the ambient air temperature sensor from the vehicle.

First, you need to install the condenser, install a new O-ring to the condenser tube, connect the condenser tube to the condenser, and install the condenser tube bolt, and a new O-ring to the discharge line. Then, please connect the discharge line to the condenser, and install the discharge line bolt, the condenser lower mounting bolts, the condenser upper bracket bolts, the front air deflector, the front air deflector bolts, and the front air deflector retainers. Finally, you should evacuate and recharge the A/C system and leak-test the fittings of the component.