< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac CTS Serpentine Tensioner
PartNumber: 12577652
Product Specifications- Notes: 3.0 Liter, 3.6 Liter, 2008-09, Serpentine Belt
- Other Names: Belt Tensioner, Serpentine Tensioner, Tensioner
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Serpentine Tensioner
$101.98 MSRP:$168.81You Save: $66.83 (40%)
Gates® Drivealign OE Exact Automatic Belt Tensioner for 2008 Cadillac CTS
PartNumber: 38419Product Specifications- Bearing Bore Inside Diameter 1: 17 mm
- Contact Surface: Smooth/Backside
- Material: Steel
- Number Of Pulleys: 1
- OE Comparison Rating: OE Exact
- Outside Diameter: 70 mm
- Pulley 1 Flanged: No
- UPC: 770075323174
- Width: 31 mm
- Part Description: Drivealign OE Exact Automatic Belt Tensioner
$58.10
Dayco® No Slack Automatic Belt Tensioner Assembly for 2008 Cadillac CTS
PartNumber: 89386Product Specifications- Belt Type: Serpentine
- Direction: Counter Clock Wise
- Number Of Pulleys: 1
- Pulley 1 Diameter: 70
- Pulley 1 Flat: Y
- Pulley 1 Width: 27
- UPC: 036687689511
- Part Description: No Slack Automatic Belt Tensioner Assembly
$56.09
OEM (Genuine) 2008 Cadillac CTS Serpentine Tensioner
PartNumber: 12577655
Product Specifications- Notes: 3.0 Liter, 3.6 Liter, 2008-09, AC Belt
- Other Names: Belt Tensioner, Serpentine Tensioner, Tensioner
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Serpentine Tensioner
$88.98 MSRP:$167.90You Save: $78.92 (48%)
Gates® Drivealign OE Exact Automatic Belt Tensioner for 2008 Cadillac CTS
PartNumber: 38418Product Specifications- Bearing Bore Inside Diameter 1: 17 mm
- Contact Surface: Smooth/Backside
- Material: Steel
- Number Of Pulleys: 1
- OE Comparison Rating: OE Exact
- Outside Diameter: 2.76"
- Pulley 1 Flanged: No
- UPC: 770075323198
- Width: 31 mm
- Part Description: Drivealign OE Exact Automatic Belt Tensioner
$59.54
Dayco® No Slack Automatic Belt Tensioner Assembly for 2008 Cadillac CTS
PartNumber: 89387Product Specifications- Belt Type: Serpentine
- Direction: Counter Clock Wise
- Number Of Pulleys: 1
- Pulley 1 Diameter: 70
- Pulley 1 Flat: Y
- Pulley 1 Width: 27
- UPC: 036687689849
- Part Description: No Slack Automatic Belt Tensioner Assembly
$57.62
OEM (Genuine) 2008 Cadillac CTS Tensioner, Camshaft Intermediate Drive Chain
PartNumber: 12609262
Product Specifications- Notes: Cts; Primary
- Item Dimensions: 4.4 x 4.3 x 4.3 inches
- Item Weight: 1.20 Pounds
- Part Description: Tensioner, Camshaft Intermediate Drive Chain
OEM (Genuine) 2008 Cadillac CTS Tensioner, Timing Chain
PartNumber: 12609260
Product Specifications- Notes: Cts; Secondary; Left
- Other Names: Chain Guide
- Item Dimensions: 4.3 x 4.2 x 4.2 inches
- Item Weight: 0.80 Pounds
- Part Description: Tensioner, Timing Chain
OEM (Genuine) 2008 Cadillac CTS Tensioner, Timing Chain
PartNumber: 12609258Product Specifications- Notes: Cts; Secondary; Right
- Other Names: Chain Guide
- Item Dimensions: 4.5 x 3.0 x 2.4 inches
- Item Weight: 0.90 Pounds
- Part Description: Tensioner, Timing Chain
FAQ for Belt Tensioner Repair
Q: How to install the Air Conditioning Compressor and Power Steering Pump Belt Tensioner?
A:
First, you need to position the drive belt tensioner and bolt to the engine. Then, please ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine. Finally, you should install the drive belt tensioner bolt, the power steering, and air conditioning drive belt, the generator, and the water pump drive belt.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the drive belt tensioner bolt?
A:
The recommended torque is 50Nm(37 lb in).
By Bob
GM Specialist
29/10/2022Q: How to remove the Water Pump and Generator Belt Tensioner?
A:
First, you need to remove the generator and water pump drive belt. Then, please loosen the drive belt tensioner bolt. Finally, you should remove the drive belt tensioner and bolt from the engine.
By Bob
GM Specialist
29/10/2022Q: How to install the Water Pump and Generator Belt Tensioner?
A:
First, you need to position the drive belt tensioner and bolt to the engine as an assembly. Then, please ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine. Finally, you should install the drive belt tensioner bolt and the generator and water pump drive belt.
By Bob
GM Specialist
29/10/2022Q: How to remove the Air Conditioning Compressor and Power Steering Pump Belt Tensioner?
A:
First, you need to remove the generator and water pump drive belt and the power steering and air conditioning drive belt. Then, please loosen the drive belt tensioner bolt. Finally, you should remove the drive belt tensioner and bolt from the engine.
By Bob
GM Specialist
29/10/2022