< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Cadillac CTS Outlet Tube
PartNumber: 15932848
Product Specifications- Notes: 3.6 Liter, 2008
- Other Names: AC Tube, Evaporator Tube, Outlet Tube
- Item Dimensions: 14.8 x 14.3 x 14.3 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89022475
- Part Description: Outlet Tube
$129.54 MSRP:$244.44You Save: $114.90 (48%)
OEM (Genuine) 2008 Cadillac CTS Suction Hose
PartNumber: 15261843
Product Specifications- Notes: 3.6 Liter, 2008
- Other Names: Suction Hose
- Item Dimensions: 31.1 x 17.1 x 4.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: Suction Hose
$117.56 MSRP:$213.77You Save: $96.21 (46%)
OEM (Genuine) 2008 Cadillac CTS Rear AC Tube
PartNumber: 19418051
Product Specifications- Notes: 3.6 Liter, 2008
- Other Names: AC Tube, Rear AC Tube
- Fitment Type: Direct Replacement
- Replaces: 22772002, 15261820
- Part Description: Rear AC Tube
OEM (Genuine) 2008 Cadillac CTS Hose Asm-A/C Compressor & Condenser
PartNumber: 25801154
Product Specifications- Notes: 3.6 Liter, 2008
- Other Names: Discharge Hose
- Item Dimensions: 25.4 x 8.7 x 6.7 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: Hose Asm-A/C Compressor & Condenser
FAQ for A/C Hose Repair
Q: What is the recommended torque for the Condenser Discharge Hose Bolt?
A:
The recommended torque is 5.4 N.m (48 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Discharge Hose (LY7)?
A:
First, you need to lubricate the O-rings, install the discharge hose, and connect the discharge hose to the compressor. Then, please install the discharge hose bolt, install the discharge hose to the condenser, install the bolt to the discharge hose and install the air deflector. Finally, you should evacuate and recharge the refrigerant system, and leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What will need to be done before replacing the Discharge Hose (LLT)?
A:
You need to remove the refrigerant and the air deflector.
By Bob
GM Specialist
28/10/2022Q: How to remove the Discharge Hose (LY7)?
A:
First, you need to recover the refrigerant and remove the air deflector and remove the bolt that holds the compressor discharge hose to the compressor. Then, please separate the compressor discharge hose from the compressor, remove the bolt from the condenser and separate the discharge line from the condenser. Finally, you should remove the discharge hose, and remove and discard the O-ring seals.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the Compressor Discharge Hose Bolt?
A:
The recommended torque is 9.8 N.m (87 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Air Conditioning Line/Tube Connector?
A:
First, you need to install the A/C quick connect fitting to the A/C refrigerant component. Then, please close the A/C quick connect fitting and evacuate and recharge the A/C system. Finally, you should leak-test the fittings of the component using J 39400-A.
By Bob
GM Specialist
28/10/2022Q: How to remove the Condenser Tube?
A:
First, you need to recover the refrigerant, the air cleaner assembly, and the A/C quick connect fitting at the liquid line. Then, please raise and support the vehicle, remove the front air deflector, and remove the condenser tube to the condenser retaining bolt. You also need to disconnect the condenser tube from the fan shroud retainer clip, disconnect the condenser tube from the condenser, disconnect the condenser tube from the liquid line, and disconnect the A/C pressure sensor electrical connector. Finally, you should remove the condenser tube, and the A/C pressure sensor and remove and discard the O-rings.
By Bob
GM Specialist
28/10/2022Q: What kind of special tool is needed in the process of the Air Conditioning Line/Tube Connector Removal/Replacement?
A:
You need to use the J 39400-A Halogen Leak Detector and the J 45689 A/C Quick Joint Tool.
By Bob
GM Specialist
28/10/2022Q: What kind of special tool is needed in the process of the Condenser Tube Replacement?
A:
You need to use the J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022Q: How to remove the Air Conditioning Line/Tube Connector?
A:
First, you need to recover the refrigerant from the A/C system. Then, please locate the A/C quick connect fitting locking tab access slots and insert J 45689 into the locking tab access slots. Finally, you should press down on the locking tab until the quick connect fitting locking tab releases and open and remove the quick connect fitting from the A/C refrigerant component.
By Bob
GM Specialist
28/10/2022See more FAQs (6)