Part Description: 2008 Buick Lucerne Vehicle Speed Sensor
More Info
Vehicle Fitment
2008 Buick Lucerne | All Trims | 6 Cyl 3.8L
$14.32
FAQ for Vehicle Speed Sensors Repair
Q: What is the installation procedure for the vehicle speed sensor?
A:
The procedure is to install the vehicle speed sensor, the electrical connector, and the bolts.
By Bob
GM Specialist
01/11/2022
Q: What is the input speed sensor installation procedure?
A:
First, install the input speed sensor into the case cover and install the input speed sensor clip into the case cover. Finally, connect the transaxle wiring harness and install the case side cover.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the vehicle speed sensor?
A:
The proper way is to remove the bolts, the electrical connector, and the retaining bolts.
By Bob
GM Specialist
01/11/2022
Q: What is the input speed sensor removal procedure?
A:
First, remove the case side cover and disconnect the transaxle wiring harness. Next, remove the input speed sensor clip from the case cover and remove the input speed sensor from the case cover.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the transmission control module service procedure?
A:
Disconnect the TCM electrical connector and tighten the bracket nuts to 10 Nm.
Q: What is the automatic transmission fluid filter and seal removal procedure?
A:
Remove the oil pan and the filter. Inspect the oil pan and the filter for the following metal particle, clutch-facing material, rubber particles, and engine coolant.
Q: How many nuts does the transmission oil cooler pipe have?
A:
The transmission oil cooler pipe has 2 nuts in total.