Part Description: 2008 Buick Lucerne Automatic Transmission Filter
More Info
Vehicle Fitment
2008 Buick Lucerne | All Trims | 6 Cyl 3.8L
FAQ for Transmission Filter Repair
Q: What is the automatic transmission fluid filter and seal removal procedure?
A:
Remove the oil pan and the filter. Inspect the oil pan and the filter for the following metal particle, clutch-facing material, rubber particles, and engine coolant.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the automatic transmission fluid and filter?
A:
The procedure is to remove the oil pan bolts, the oil pan, the gasket, and the oil filter seal.
By Bob
GM Specialist
02/11/2022
Q: What is the proper way to install the automatic transmission fluid and filter?
A:
The proper way is to install a new seal, the filter, and the oil pan, and inspect the gasket for any leaks.
By Bob
GM Specialist
02/11/2022
Q: What is the automatic transmission fluid filter installation procedure?
A:
Install a new seal, filter, and gasket.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the transmission control module service procedure?
A:
Disconnect the TCM electrical connector and tighten the bracket nuts to 10 Nm.
Q: How many nuts does the transmission oil cooler pipe have?
A:
The transmission oil cooler pipe has 2 nuts in total.
Q: What is the removal procedure for the transmission fluid cooler pipe fitting?
A:
The procedure is to disengage the plastic cap, disconnect the TOC line, and remove the TOC fitting.