< Back ×
My Vehicle Change Vehicle
2008 Buick Lucerne
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2008 Buick Lucerne Pad Asm-Rear Seat Cushion (W/ Frame)
PartNumber: 15903859
Product Specifications- Other Names: Seat Cushion Pad
- Item Dimensions: 58.2 x 20.7 x 8.2 inches
- Item Weight: 16.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Lucerne Pad Asm-Rear Seat Cushion (W/ Frame)
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Buick Lucerne Pad Asm-Driver Seat Cushion
PartNumber: 15268886
Product Specifications- Notes: Driver Seat, Seat Cushion, W/O Seat Heater
- Other Names: Seat Cushion Pad
- Item Dimensions: 23.0 x 21.5 x 7.0 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Lucerne Pad Asm-Driver Seat Cushion
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Buick Lucerne Pad Asm-Driver Seat Cushion
PartNumber: 15268758Product Specifications- Notes: Driver Seat, Seat Cushion, W/Seat Heater
- Other Names: Seat Cushion Pad
- Item Dimensions: 34.3 x 6.8 x 5.6 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Lucerne Pad Asm-Driver Seat Cushion
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
FAQ for Seat Cushion Pad Repair
Q: What is the rear seat cushion and pad service procedure?
A:
Remove the rear seat cushion and make sure the cover is secured to the pad with hook and loop fasteners.
By Bob
GM Specialist
01/11/2022Q: What is the front seat back cover and cushion pad service procedure?
A:
Disable the SIR system and remove the front seats.
By Bob
GM Specialist
01/11/2022Q: What is the front seat cushion outer trim panel service procedure?
A:
Remove the back seat recliner handle and remove the trim cover over the seat belt access. Next, slide the seat belt out of the cover assembly and pull outward to detach it from the seat assembly, and disconnect the seat switch electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the rear seat cushion service procedure?
A:
Lift up on the front of the seat cushion and pull up and out to remove.
By Bob
GM Specialist
01/11/2022Q: What is the front seat cushion frame service procedure?
A:
Disable the SIR system and remove the front seat. Next, remove the front seat cushion cover/pad and the passenger presence system on the passenger seat. Tighten the seat cushion frame nuts to 9 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the front sea back frame service procedure?
A:
Tighten the front seat back cushion frame bolt to 24 Nm.
By Bob
GM Specialist
01/11/2022Q: What are the seat cushion trim cover and pad service procedures?
A:
First, disconnect the seat cover J-channel from the seat cushion frame and remove the seat cushion cover and pad as an assembly from the seat cushion frame. Next, remove the hog rings that secure the pad to the cushion cover.
By Bob
GM Specialist
01/11/2022Q: What is the front seat back trim service procedure?
A:
First, disable the SIR system and remove the seat back cushion cover/pad.
By Bob
GM Specialist
01/11/2022See more FAQs (3)