Part Description: 2008 Buick Lucerne Harness Asm-Heater & A/C Control Lamp Wiring
More Info
Vehicle Fitment
2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
FAQ for HVAC Harness Connector Repair
Q: What should you do before you replace the heater and A/C control wiring harness?
A:
You should remove the evaporator core.
By Bob
GM Specialist
01/11/2022
Q: What should you remove before you replace the heated and A/C control wiring harness?
A:
You should remove the evaporator core from the vehicle.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the ambient air temperature sensor service procedure?
A:
First, remove the front compartment sight shield and disconnect the ambient Air Temperature Sensor electrical connector. Make sure to squeeze the three ambient temperature sensor tabs to release the sensor from the bracket.
Q: What is the blower motor service procedure?
A:
First, remove the right-hand closeout insulator panel and disconnect the Blower Motor electrical connector. Tighten the blower motor screws to 1.0 Nm.
Q: What is the blower motor resistor service procedure?
A:
Remove the right-hand closeout insulator and disconnect the Blower Motor Resistor electrical connector. Tighten the motor resistor screw to 1.0 Nm.