2008 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$74.27MSRP: $112.55
You Save: $38.28 (35%)
FAQ for Coolant Reservoir Repair
Q: What is the radiator surge tank outlet hose/pipe service procedure?
A:
Drain the cooling system and remove the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022
Q: What is the coolant recovery reservoir service procedure?
A:
Use a J 38185 hose clamp plier to position the coolant recovery reservoir hose clamp aside and remove the hose from the reservoir. Tighten the coolant recovery reservoir nuts to 9 Nm.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the pump pulley installation procedure?
A:
Position the Water Pump drive pulley on the intake camshaft and install the water pump pulley onto the intake camshaft. Install the camshaft end cap and tighten the cap to 2 Nm. Finally, install the water pump drive belt tensioner shield.
Q: What is the engine coolant fan motor installation procedure?
A:
Install the Cooling Fan Motor to the fan shroud, install the motor retaining bolts, and tighten the bolts to 6 nm. Next, install the cooling fan and the cooling fan assembly.
Q: Does the coolant leak detection dye change the color of the coolant?
A:
No, the leak detection dye will not change the coolant.