< Back ×
My Vehicle Change Vehicle
2008 Buick Lucerne
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Dorman® Automatic Transmission Oil Cooler Line Connector for 2008 Buick Lucerne
PartNumber: 800-736Product Specifications- Notes: To Trans; 1/4" x 18 Thread to Quick Connect; Pkg Quantity: 1
- Fitting Angle: Straight
- Fitting Attachment End 1: Quick Disconnect
- Fitting Attachment End 2: Male Thread
- Fitting Size End 1 (in): 0.375"
- Fitting Size End 2 (in): 0.25"
- Line Fitting Type: Transmission Line Connector
- Material: Aluminum
- OE Part Number: 24225126
- Thread Sealer Present: No
- UPC: 037495548205
- Part Description: 2008 Buick Lucerne Automatic Transmission Oil Cooler Line Connector
Vehicle Fitment- 2008 Buick Lucerne | All Trims | 8 Cyl 4.6L
$14.50
Dorman® Automatic Transmission Oil Cooler Line Connector for 2008 Buick Lucerne
PartNumber: 800-735Product Specifications- Notes: To Trans; 9/16" x 18 Thread to Quick Connect; Pkg Quantity: 1
- Fitting Angle: Straight
- Fitting Attachment End 1: Quick Disconnect
- Fitting Attachment End 2: Male Thread
- Fitting Size End 1 (in): 0.375"
- Fitting Size End 2 (in): 0.563"
- Line Fitting Type: Transmission Line Connector
- Material: Aluminum
- OE Part Number: 24225125
- Thread Sealer Present: No
- UPC: 037495548199
- Part Description: 2008 Buick Lucerne Automatic Transmission Oil Cooler Line Connector
Vehicle Fitment- 2008 Buick Lucerne | All Trims | 8 Cyl 4.6L
$11.73
FAQ for Automatic Transmission Oil Cooler Line Connector Repair
Q: What is the removal procedure for the transmission fluid cooler pipe fitting?
A:
The procedure is to disengage the plastic cap, disconnect the TOC line, and remove the TOC fitting.
By Bob
GM Specialist
01/11/2022Q: How do you install the transmission fluid cooler pipe fitting?
A:
You can install the TOC fitting, connect the TOC line, and inspect the fluid level.
By Bob
GM Specialist
01/11/2022Q: How do you remove the transmission fluid cooler pipe fitting?
A:
You can disengage the plastic cap, disconnect the TOC line, and remove the TOC fitting.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the fluid cooler pipe fitting?
A:
The procedure is to install the TOC fitting, connect the TOC line, and remove the drain pan.
By Bob
GM Specialist
01/11/2022Q: What is the transmission fluid cooler hose/pipe connector installation procedure?
A:
Install the TOC fitting to the radiator and tighten the fitting to 18 Nm. Next, connect the TOC line to the TOC fitting and snap the plastic cap onto the TOC fitting. Make sure the plastic cap is fully seated against the fitting.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the transmission fluid cooler hose/pipe?
A:
The proper way is to install the TOC fitting, connect the TOC line, and check the fluid level.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the transmission fluid cooler hose/pipe?
A:
The procedure is to disengage the plastic cap, disconnect the TOC line, and remove the TOC fitting.
By Bob
GM Specialist
01/11/2022Q: What is the transmission fluid cooler hose/pipe quick-connect fitting installation procedure?
A:
First, install a new retaining ring into the quick-connect fitting, hook one of the open ends of the retaining ring and rotate the retaining ring around the fitting until the retaining ring is positioned with all three ears. Install the cooler line into the quick-connect fitting.
By Bob
GM Specialist
01/11/2022See more FAQs (3)