First, inflate the tire to the manufacturer's specified pressure as stated on the tire. Next, submerge the tire/wheel into a water bath to locate the leak and inscribe a mark on the wheel to indicate the leak areas. Remove the tire from the wheel and use number 80 grit sandpaper to scuff inside to scuff the inside of the rim surface at the leak area. Apply a 3 mm thick layer of adhesive and align the inscribed mark on the tire with the valve stem on the wheel. Next, install the tire to the wheel and inflate the tire to the manufactures specified pressure as stated on the tire.
By BobGM Specialist
28/10/2022