Part Description: 2008 Buick Lucerne Hose Asm-A/C Compressor
More Info
Vehicle Fitment
2008 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
FAQ for A/C Hose Repair
Q: What can you do before you replace the suction hose?
A:
You can remove the front air deflector, and disconnect the A/C compressor, and condenser.
By Bob
GM Specialist
28/10/2022
Q: What should you remove before replacing the A/C evaporator hose?
A:
You should recover the refrigerant, and remove the injector sight shield, and the upper tie bar.
By Bob
GM Specialist
28/10/2022
Q: What can you do before you replace the discharge hose?
A:
You can recover the refrigerant, remove the air deflector, and disconnect the A/C compressor.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the ambient air temperature sensor service procedure?
A:
First, remove the front compartment sight shield and disconnect the ambient Air Temperature Sensor electrical connector. Make sure to squeeze the three ambient temperature sensor tabs to release the sensor from the bracket.
Q: What is the blower motor service procedure?
A:
First, remove the right-hand closeout insulator panel and disconnect the Blower Motor electrical connector. Tighten the blower motor screws to 1.0 Nm.
Q: What is the blower motor resistor service procedure?
A:
Remove the right-hand closeout insulator and disconnect the Blower Motor Resistor electrical connector. Tighten the motor resistor screw to 1.0 Nm.