2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$193.86MSRP: $292.48
You Save: $98.62 (34%)
FAQ for Trunk Lid Latch Repair
Q: What is the rear compartment lid latch installation procedure?
A:
First position the rear compartment lid latch to the alignment marks on the rear compartment lid. Tighten the nuts to 10 Nm, connect the electrical connectors to the rear compartment lid latch, and the lock cylinder actuator cable to the lock cylinder, and install the rear compartment lid carpet.
By Bob
GM Specialist
01/11/2022
Q: What is the rear compartment lid latch striker installation procedure?
A:
Place the rear compartment lid lock strike to the rear compartment body panel and install the bolts in the center hole in the rear compartment lid lock striker under the rear bumper fascia above the impact bar to the rear body panel. Install the other rear compartment lid lock striker bolts and tighten them to 16 Nm. Install the bolts to the lock striker in the rear compartment and tighten the bolts to 16 Nm. Finally, install the rear bumper fascia and the rear compartment trim.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the front floor console cup holder service procedure?
A:
Remove the front floor console and tighten the front floor console Cup Holder screws to 2 Nm.
Q: Can the rear side door lock actuator be serviced separately?
A:
The Door Lock Actuator is part of the rear door lock and cannot be serviced separately.
Q: How do I install the door lock switch?
A:
Press the Door Lock Switch into the door trim panel and connect the electrical connector to the switch. Lastly, install the door trim panel.