< Back ×
My Vehicle Change Vehicle
2008 Buick LaCrosse
< Back to View All
Steering Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick LaCrosse Upper Shaft
PartNumber: 26074286
Product Specifications- Notes: Column Shift; Floor Shift; Lacrosse
- Other Names: Shaft, Shaft Assembly, Upper Shaft
- Item Dimensions: 6.4 x 5.0 x 4.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick LaCrosse Upper Shaft
Vehicle Fitment- 2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$190.00 MSRP:$314.49You Save: $124.49 (40%)
Dorman® Lower Steering Shaft for 2008 Buick LaCrosse
PartNumber: 425-169Product Specifications- Color: Natural
- Finish: Natural
- Installation Instructions Included: No
- Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 25829292
- Shaft Diameter: 0.76"
- Shaft Diameter (in): 0.76"
- Shaft Length: 4.72"
- Shaft Length (In): 4.72"
- Shaft Material: Steel
- Spline Count: 27
- UPC: 019495385776
- Part Description: 2008 Buick LaCrosse Lower Steering Shaft
Vehicle Fitment- 2008 Buick LaCrosse | All Trims | All Engines
OEM (Genuine) 2008 Buick LaCrosse Steering Gear Coupling Shaft
PartNumber: 25828562
Product Specifications- Notes: Lacrosse
- Other Names: Intermediate Shaft
- Item Dimensions: 4.2 x 4.2 x 12.0 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10367738
- Part Description: 2008 Buick LaCrosse Steering Gear Coupling Shaft
Vehicle Fitment- 2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2008 Buick LaCrosse Steering Gear Coupling Shaft Assembly
PartNumber: 25829292
Product Specifications- Notes: Column Shift; Floor Shift
- Other Names: Coupling Shaft
- Item Dimensions: 12.1 x 4.2 x 4.1 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15243954
- Part Description: 2008 Buick LaCrosse Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
FAQ for Steering Shaft Repair
Q: What is the intermediate steering shaft installation procedure?
A:
Place the intermediate steering shaft into the seal and connect the intermediate shaft to the steering column. Next, install the upper boot to the ridge and around the intermediate shaft pass-through. Install the intermediate steering shaft pinch bolt and tighten the pinch bolt to 48 Nm.
By Bob
GM Specialist
02/11/2022Q: What is the intermediate steering shaft seal installation procedure?
A:
First, install the intermediate shaft seal over the intermediate shaft from the inside of the vehicle. Next, connect the intermediate shaft to the steering column and install the upper intermediate shaft pinch bolt. Make sure to tighten the bolt to 48 Nm and install the intermediate shaft seal bolts. Tighten the intermediate shaft seal bolts to 3 Nm and connect the lower/intermediate shaft seal to the steering column.
By Bob
GM Specialist
02/11/2022