< Back ×
My Vehicle Change Vehicle
2008 Buick LaCrosse
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2008 Buick LaCrosse Heater Asm, Driver Seat Cushion
PartNumber: 19123111
Product Specifications- Other Names: Element, Seat Cushion Heater
- Item Dimensions: 17.5 x 14.0 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick LaCrosse Heater Asm, Driver Seat Cushion
Vehicle Fitment- 2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2008 Buick LaCrosse Heater Asm, Passenger Seat Back Cushion
PartNumber: 88950567
Product Specifications- Other Names: Element, Seat Back Heater
- Item Dimensions: 15.5 x 10.7 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick LaCrosse Heater Asm, Passenger Seat Back Cushion
Vehicle Fitment- 2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
FAQ for Seat Heater Pad Repair
Q: How do I remove the Driver Seat and Passenger Seat Back Cushion Heater?
A:
Start with removing the front seat, and next disconnect the electrical connector from the seat back cushion heater. Then gently pull on the heater element to remove the element from the seat back. Do not damage the seat back.
By Bob
GM Specialist
01/11/2022Q: How do I install the Driver Seat and Passenger Seat Back Cushion Heater?
A:
Start by peeling off the self-stick tape from the heater element, and position the heater element over the seat back. Press firmly to engage the adhesive. Route and connect the electrical connector to the seat back cushion. Secure the wire with tie straps. Install the seat back cover and the front seat.
By Bob
GM Specialist
01/11/2022Q: How do I verify the system for the driver and passenger heated seats?
A:
Ignition ON, observe the scan tool driver and passenger heated seat parameter while turning the driver seat heater switch ON and OFF. The reading should change between OFF, LOW, and HIGH.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Driver Seat and Passenger Seat Cushion Heater?
A:
You will need to remove the bucket seat and re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger system is removed.
By Bob
GM Specialist
01/11/2022Q: What are the driver and passenger seats controlled by?
A:
The driver and passenger heated seats are controlled by separate heated seat switches. Both switches are located in the HVAC control module.
By Bob
GM Specialist
01/11/2022