Part Description: 2008 Buick LaCrosse Air Mass Meter
More Info
Vehicle Fitment
2008 Buick LaCrosse | CXS | 6 Cyl 3.6L
2008 Buick LaCrosse | CX | 6 Cyl 3.8L
2008 Buick LaCrosse | CXL | 6 Cyl 3.8L
2008 Buick LaCrosse | Super | 8 Cyl 5.3L
Show More
FAQ for Mass Air Flow Sensor Repair
Q: What is the airflow sensor/intake air temperature sensor installation procedure?
A:
Install the MAF/IAT sensor to the air cleaner housing, install the sensor bolts and tighten the bolts to 10 Nm. Next, connect the MAF/IAT sensor electrical connector and install the air intake duct.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the throttle body assembly installation procedure?
A:
First, install a new Throttle Body gasket and position the throttle body to the intake manifold. Install the throttle body bolts and tighten them to 10 Nm. Connect the EVAP canister purge tube to the throttle body and install the air cleaner outlet duct. Finally, install the engine sight shield and connect a scan tool to test for proper throttle opening and throttle closing ranges.
Q: What is the air cleaner element installation procedure?
A:
First, install a new Air Filter element and install the air cleaner housing cover. Next, engage the spring clamps on top of the air cleaner housing and install the air cleaner outlet duct.
Q: What is the proper way to remove the manifold absolute pressure sensor?
A:
The proper way is to remove the engine sight shield, disconnect the MAP Sensor electrical connector, and remove the MAP sensor and the MAP sensor grommet.