Part Description: 2008 Buick LaCrosse Lever, Steering Column Telescope Adjuster
More Info
Vehicle Fitment
2008 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
FAQ for Automatic Transmission Shift Levers Repair
Q: What is the torque spec for the shift lever screws?
A:
20 Nm (15 ft./lbs.).
By Bob
GM Specialist
01/11/2022
Q: What needs to be removed to replace the transmission control?
A:
The console trim plate, console wiring harness, console shift control harness, transaxle range selector cable, and the shift control retaining nuts.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the shift lever?
A:
You must disable the SIR system, slide the seal over the lever, disconnect the connector, remove the screws, and remove the lever seal.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the automatic transmission fluid filter and seal?
A:
The procedure is to remove the oil pan, and the filter, and correct the source.
Q: How do you remove the oil pan?
A:
You need to remove the drain pan and drain the oil, remove the transaxle bolts, and remove the oil pan gasket.
Q: What is the transmission floor shift indicator lamp installation procedure?
A:
First, install the bulb to the socket and place the floor shift control indicator lamp socket into the trim bezel opening. Next, install the front floor console.