FAQ for Wiper Blade Repair
Q: What will need to be done before replacing the Rear Window Wiper Blade Replacement (Acadia, Enclave, OUTLOOK)?
A:
You will need to remove the rear wiper arm from the vehicle, hold the arm stationary and rotate the blade in a vertical position, and then push and install the wiper blade on and off from the wiper arm.
By BobGM Specialist
01/11/2022 Q: How do you remove the Rear Window Wiper Blade?
A:
You can fully secure the wiper blade to the wiper arm when an audible click noise is heard.
By BobGM Specialist
01/11/2022 Q: How do you remove the Windshield Wiper Blade?
A:
You can press the square tab inward at the top of the wiper arm to release the blade, slide the blade assembly from the wiper arm, and then discard the blade if the rubber element appears worn, or does not wipe the windshield clean.
By BobGM Specialist
01/11/2022 Q: What will need to be done before replacing the Windshield Wiper Blade (Enclave)?
A:
You will need to raise the wiper arm to the full-up position to release the wiper blade from the wiper arm.
By BobGM Specialist
01/11/2022 Q: How many wiper blades does the Windshield have?
A:
The Windshield has a total of 2 wiper blades.
By BobGM Specialist
01/11/2022 Q: How do you clean the Blade Element?
A:
You need to lift each blade assembly off of the windshield and clean the element with a cloth saturated with full-strength washer solvent, and then rinse the blade assemblies with clear water.
By BobGM Specialist
01/11/2022 See more FAQs (1)