< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Valve Seals
PartNumber: 19207664
Product Specifications- Notes: Enclave, Traverse
- Other Names: Valve Seal
- Item Dimensions: 1.7 x 1.3 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Valve Seals
Vehicle Fitment- 2008 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
$27.83 MSRP:$46.08You Save: $18.25 (40%)
Victor Reinz® Valve Stem Oil Seal Set for 2008 Buick Enclave
PartNumber: 12-10111-01Product Specifications- Complete: Y
- Contains Applications: Y
- Gasket Type: Gasket
- Grade Type: Regular
- Inside Diameter: 0.190
- Material: Metal And Rubber
- Meets or Exceeds OEM Specs: y
- Outside Diameter: 1.084
- Release Wave: 05/31/2018
- Sealing Surface Type: Flanged
- Thickness: 0.779
- UPC: 023913658823
- Part Description: 2008 Buick Enclave Valve Stem Oil Seal Set
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$28.96
FAQ for Valve Stem Oil Seal Repair
Q: How do you remove the Valve Stem Oil Seal and Valve Spring-Right Side?
A:
You need to remove the starter motor, install the EN 46106 to prevent crankshaft rotation, remove the camshafts and rocker arms and the spark plug from the applicable cylinder, install the J 39313 to the applicable cylinder, connect the J 39313 to a compressed air source, install the EN 46110 above the applicable cylinder as shown, tighten the EN 46110 valve spring compressor nut, remove the valve keepers, loosen the EN 46110 valve spring compressor nut, and then remove the valve spring retainer, the valve spring, and the valve stem seal.
By Bob
GM Specialist
01/11/2022Q: How do you install the Valve Stem Oil Seal and Valve Spring-Left Side?
A:
You need to install the valve stem seal, the valve spring, the valve spring retainer, the EN 46110 above the applicable valve spring as shown, and the valve spring keepers, remove the EN 46110, disconnect the J 39313 from the compressed air source, remove the J 39313, install the spark plugs and the rocker arms and camshafts, remove the EN 46106, and then install the starter motor.
By Bob
GM Specialist
01/11/2022Q: How do you install the Valve Stem Oil Seal and Valve Spring-Right Side?
A:
You need to install the valve stem seal, the valve spring, the valve spring retainer, the EN 46110 above the applicable valve spring as shown, and the valve spring keepers, remove the EN 46110, disconnect the J 39313 from the compressed air source, remove the J 39313, install the spark plugs and the rocker arms and camshafts, remove the EN 46106, and then install the starter motor.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Valve Stem Oil Seal and Valve Spring-Left Side?
A:
You need to remove the starter motor, install the EN 46106 to prevent crankshaft rotation, remove the camshafts and rocker arms and the spark plug from the applicable cylinder, install the J 39313 to the applicable cylinder, connect the J 39313 to a compressed air source, install the EN 46110 above the applicable cylinder as shown, tighten the EN 46110 valve spring compressor nut, remove the valve keepers, loosen the EN 46110 valve spring compressor nut, and then remove the valve spring retainer, the valve spring, and the valve stem seal.
By Bob
GM Specialist
01/11/2022