< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Power Sunroof & Convertible Top
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Motor
PartNumber: 15912896
Product Specifications- Notes: Enclave, Traverse; Sunroof Motor
- Other Names: Motor, Window Motor
- Item Dimensions: 9.5 x 3.1 x 3.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Motor
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$262.77 MSRP:$495.82You Save: $233.05 (48%)
OEM (Genuine) 2008 Buick Enclave Window Shade Motor
PartNumber: 25841391
Product Specifications- Notes: Enclave, Traverse; Sunshade Motor; Rear Sunshade
- Other Names: Motor, Window Shade Motor
- Item Dimensions: 9.4 x 4.2 x 3.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15912897
- Part Description: 2008 Buick Enclave Window Shade Motor
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
FAQ for Sunroof Motor Repair
Q: How many screws does the Sunroof Window Motor/Actuator have?
A:
The Sunroof Window Motor/Actuator has a total of 3 screws.
By Bob
GM Specialist
01/11/2022Q: How do you initiate/teach the Sunroof Motor/Actuator (New Motor)?
A:
You can press the sunroof switch to the vent open position until the window stalls at the front hard stop in the vent open position and then moves slightly to the soft stop position, release the button, press and hold the sunroof switch vent open again, continue holding the switch until the sunroof window moves to fully open and then back to close and stops at the closed position, release the button, and then verify the operation of the sunroof.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Sunroof Window Motor/Actuator screw?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you initiate/teach the Sunroof Motor/Actuator (New Roller Sunshade)?
A:
You can press the roller sunshade switch to the open position until the sunshade stalls at the rear hard stop in the fully open position and then moves slightly to the soft stop position, release the button, press and hold the roller switch open again, continue holding the switch until the roller sunshade moves to close and stops at the closed position, release the button, and then verify the operation of the roller sunshade.
By Bob
GM Specialist
01/11/2022Q: How do you initiate/teach the Sunroof Motor/Actuator (Existing Motor)?
A:
You can press the sunroof switch to the vent open position until the window reaches the vent open soft stop position, release the switch, press the sunroof switch vent open and hold for approximately 10 seconds until the window stalls at the front hard stop in the vent open position and then moves slightly to the soft stop position, release the button, press and hold the sunroof switch vent open again, continue holding the switch until the sunroof window moves to fully open and then back to close and stops at the closed position, release the button, and then verify the operation of the sunroof.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Sunroof Motor/Actuator?
A:
You will need to lower the headliner.
By Bob
GM Specialist
01/11/2022Q: How do you initiate/teach the Sunroof Motor/Actuator (Existing Roller Sunshade)?
A:
You can press the roller sunshade switch to the open position until the sunshade reaches the full open soft stop position, release the switch, press the roller sunshade switch open, and hold for approximately 10 seconds until the sunshade stalls at the rear hard stop in the fully open position and then moves slightly to the soft stop position, release the button, press and hold the roller switch open again, continue holding the switch until the roller sunshade moves to close and stops at the closed position, release the button, and then verify the operation of the roller sunshade.
By Bob
GM Specialist
01/11/2022See more FAQs (2)