< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Pump Asm-P/S
PartNumber: 20954812
Product Specifications- Other Names: Power Steering Pump
- Item Dimensions: 13.5 x 6.6 x 6.4 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85112727
- Part Description: 2008 Buick Enclave Pump Asm-P/S
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$143.17 MSRP:$249.19You Save: $106.02 (43%)
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2008 Buick Enclave
PartNumber: 20-2403Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2008 Buick Enclave Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$98.30
MAVAL® Power Steering Pump for 2008 Buick Enclave
PartNumber: 97192MProduct Specifications- Notes: (All Models); Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613121461
- Part Description: 2008 Buick Enclave Power Steering Pump
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$113.39
FAQ for Power Steering Pump Repair
Q: What is the recommended torque for the power steering gear inlet hose fitting?
A:
The recommended torque is 27 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Power Steering Pump Pulley?
A:
You will need to remove the power steering system.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Power Steering Pump Pulley?
A:
You need to remove the power steering pump pulley, install the power steering pump pulley, and then ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).
By Bob
GM Specialist
01/11/2022