< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Manifold-Upper Intake (Machine)
PartNumber: 12602219
Product Specifications- Other Names: Intake Manifold, Intake Plenum
- Item Dimensions: 20.0 x 15.4 x 8.8 inches
- Item Weight: 12.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Manifold-Upper Intake (Machine)
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Manifold-Lower Intake (Machine)
PartNumber: 12602220
Product Specifications- Notes: Enclave, Traverse
- Other Names: Intake Manifold
- Item Dimensions: 14.7 x 8.3 x 7.3 inches
- Item Weight: 5.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Manifold-Lower Intake (Machine)
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
FAQ for Intake Manifold Repair
Q: How do you remove the Lower Intake Manifold?
A:
You need to remove the fuel injectors and fuel rail, the lower intake manifold bolts, and the lower intake manifold and gasket from the engine, and then clean and inspect the intake manifold and the sealing surfaces.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Intake Manifold Tuning Valve have?
A:
The Intake Manifold Tuning Valve has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Upper Intake Manifold?
A:
You need to remove the fuel injector sight shield, the air cleaner outlet duct, and the intake manifold insulator, disconnect the evaporative emissions (EVAP) canister purge line and reposition aside, the PCV line from the top of the intake manifold, and reposition aside and the intake manifold tuning valve electrical connector, remove the brake booster vacuum hose from the intake manifold, disconnect the electronic throttle control (ETC) electrical connector, remove the engine harness bracket retaining bolt, disconnect the map sensor electrical connector, and then remove the upper intake retaining bolts, the evaporative emissions (EVAP) purge solenoid valve, the intake manifold tuning valve, and the throttle body.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Right Side Intake Manifold Insulator have?
A:
The Right Side Intake Manifold Insulator has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Intake Manifold Tuning Valve?
A:
You will need to remove the upper intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Right Side Intake Manifold Insulator bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Intake Manifold Insulator?
A:
You will need to remove the air cleaner outlet duct, the manifold absolute pressure sensor, the positive crankcase ventilation hose, and the brake booster hose from the intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Intake Manifold Tuning Valve bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the Lower Intake Manifold?
A:
You need to install the lower intake manifold gasket, the lower intake manifold bolts, and the fuel injectors and fuel rail.
By Bob
GM Specialist
01/11/2022Q: How do you install the Upper Intake Manifold?
A:
You need to install the upper intake manifold gaskets to the lower intake manifold and install the fir tree retainers to retain the upper intake manifold gasket position and the upper intake manifold, apply thread lock to the bolt threads, install the throttle body, the intake manifold tuning valve and the EVAP purge solenoid valve, connect the map sensor electrical connector, install the engine harness bracket retaining bolt, connect the ETC electrical connector, install the brake booster vacuum hose to the intake manifold, connect the intake manifold tuning valve electrical connector, the PCV line to the top of the intake manifold and the EVAP canister purge line, and then install the intake manifold insulator, the air cleaner outlet duct, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022See more FAQs (5)