< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Lower Hinge
PartNumber: 23436137
Product Specifications- Location: Driver Side
- Other Names: Lower Hinge
- Item Dimensions: 4.8 x 4.4 x 4.4 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25943917, 25989939, 20877345, 25863523, 15119441
- Part Description: 2008 Buick Enclave Lower Hinge
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$105.12 MSRP:$158.60You Save: $53.48 (34%)
OEM (Genuine) 2008 Buick Enclave Upper Hinge
PartNumber: 25943923
Product Specifications- Location: Passenger Side
- Other Names: Upper Hinge
- Item Dimensions: 4.7 x 4.7 x 4.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15119440
- Part Description: 2008 Buick Enclave Upper Hinge
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$121.01 MSRP:$182.57You Save: $61.56 (34%)
OEM (Genuine) 2008 Buick Enclave Lower Hinge
PartNumber: 23436138
Product Specifications- Location: Passenger Side
- Other Names: Lower Hinge
- Item Dimensions: 4.7 x 4.4 x 4.3 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20877346, 25989940, 15119442
- Part Description: 2008 Buick Enclave Lower Hinge
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$113.17 MSRP:$177.99You Save: $64.82 (37%)OEM (Genuine) 2008 Buick Enclave Upper Hinge
PartNumber: 25943922
Product Specifications- Location: Driver Side
- Other Names: Upper Hinge
- Item Dimensions: 4.9 x 4.7 x 4.6 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15119439
- Part Description: 2008 Buick Enclave Upper Hinge
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$100.84 MSRP:$158.60You Save: $57.76 (37%)
OEM (Genuine) 2008 Buick Enclave Hinge
PartNumber: 15922927
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hinge
- Item Dimensions: 13.3 x 4.6 x 4.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Hinge
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$76.74 MSRP:$114.24You Save: $37.50 (33%)
FAQ for Door Hinge Repair
Q: What is the recommended torque for the Front Side Door Hinge upper bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How many upper bolts does the Front Side Door Hinge have?
A:
The Front Side Door Hinge has a total of 3 upper bolts.
By Bob
GM Specialist
01/11/2022Q: How many upper bolts does the Rear Side Door Hinge have?
A:
The Rear Side Door Hinge has a total of 2 upper bolts.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Front Side Door Hinge?
A:
You will need to disable the supplemental inflatable restraint system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Rear Side Door Hinge upper bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you remove the Rear Side Door Lower Hinge?
A:
You need to check the door for proper alignment, and then adjust it as necessary.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the Door Lock Striker?
A:
You need to ensure that the door is properly aligned with the door opening before proceeding with the striker adjustment, open and close the door on the striker, mark around the striker for reference of the original position, loosen the striker screws, adjust the door striker up or down and inboard or outboard as required, move the striker to eliminate drag on the striker and door latch and to achieve proper door position within door opening, start with up/down position, position the striker to achieve proper alignment to the door opening, set the in/out adjustment for proper door seal engagement, adjust the striker and add spacers as required, inspect the door for proper operation, and then close the door.
By Bob
GM Specialist
29/10/2022Q: How do you install the Front Side Door Lock Striker?
A:
You need to loosely install the striker with the bolts, align the striker with the marks made prior to removal, install the bolts, hand tighten, inspect the door closing and align the striker as required, and then tighten the striker bolts.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Front Side Door Lock Striker?
A:
You need to mark around the striker for installation purposes, and then remove the bolts and the striker.
By Bob
GM Specialist
29/10/2022See more FAQs (4)