< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Fog Lights & Driving Lights
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Daytime Run Lamp
PartNumber: 15130030
Product Specifications- Location: Passenger Side
- Other Names: Daytime Run Lamp
- Item Dimensions: 13.0 x 8.7 x 4.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Daytime Run Lamp
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$69.75 MSRP:$109.71You Save: $39.96 (37%)OEM (Genuine) 2008 Buick Enclave Daytime Run Lamp
PartNumber: 15130029
Product Specifications- Location: Driver Side
- Other Names: Daytime Run Lamp
- Item Dimensions: 13.3 x 10.4 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Daytime Run Lamp
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$72.71 MSRP:$109.71You Save: $37.00 (34%)
FAQ for Daytime Running Lights Repair
Q: How do you remove the Daytime Running Lamp Bulb?
A:
You need to pull the bulb straight from the socket assembly.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Daytime Running Lamp Bulb (Enclave)?
A:
You will need to remove the front wheelhouse liner.
By Bob
GM Specialist
01/11/2022Q: How do you remove the JST Connectors?
A:
You need to remove the connector from the component, locate the two indents of the terminal position assurance (TPA) located on the bottom of the connector body, raise the TPA on both sides of the connector, release the terminals, move the terminal release to the right with a gentle prying motion, and then pull the wire out of the back of the connector.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Daytime Running Lamp (DRL) Ambient Light Sensor (With UV6)?
A:
You need to twist and pull down to remove and then disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for Daytime Running Lamp Assembly Screw?
A:
The recommended torque is 2.5 N.m (22 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you remove the Daytime Running Lamp Socket Assembly?
A:
You need to rotate counter-clockwise the bulb socket and pull it downward.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Daytime Running Lamp (Enclave)?
A:
You will need to remove the front fog lamp bezel.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Daytime Running Lamp?
A:
You need to rotate the lamp assembly forward and lift it upward to disengage the lamp tabs from the parking and front fog lamp bracket assembly.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Daytime Running Lamp (DRL) Ambient Light Sensor (Without UV6)?
A:
You need to twist and pull down to remove and then disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022See more FAQs (4)