FAQ for Brake Pad Set Repair
Q: How many pads does the disc brake have?
A:
The disc brake has a total of 2 pads.
By BobGM Specialist
01/11/2022 Q: What will need to be done before replacing the front disc brake pads?
A:
You will need to inspect the fluid level in the brake master cylinder reservoir to decide whether to remove the brake fluid, raise and support the vehicle, and then remove the tire and wheel assembly.
By BobGM Specialist
01/11/2022 Q: How many shims does the brake pad have?
A:
The brake pad has a total of 2 shims.
By BobGM Specialist
01/11/2022 Q: What is the burnishing procedure for the brake pad and rotor?
A:
The procedure is to select a smooth road with little or no traffic, accelerate the vehicle to 48 km/h (30 mph), apply the brakes to bring the vehicle to a stop, and then repeat steps 2 and 3 until approximately 20 stops have been completed.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the brake caliper guide pin bolt?
A:
The recommended torque is 64 Nm (47 lb-ft).
By BobGM Specialist
01/11/2022 Q: What will need to be done before replacing the rear disc brake pads?
A:
You will need to inspect the fluid level in the brake master cylinder reservoir to decide whether to remove the brake fluid, raise and support the vehicle, and then remove the tire and wheel assembly.
By BobGM Specialist
01/11/2022 See more FAQs (1)