You can install the idler pulley to the generator, the generator and idler pulley together to the vehicle, the power steering fluid reservoir hose clip bracket onto one of the generator bolts, the bolt finger tight, and the A/C compressor/evaporator hose bracket onto the other generator bolt, install the bolt finger tight, tighten the idler pulley/generator bolts, install the power steering reservoir inlet hose clip to the power steering fluid reservoir hose clip bracket, connect the engine wiring harness electrical connector to the generator, install the battery positive junction block cable terminal to the generator stud and the battery positive junction block cable to generator nut, position the battery positive junction block cable boot over the stud, install the A/C liquid line clamp bolt (2) at the upper radiator support, the engine mount strut bracket, the fuel injector sight shield and the drive belt, and then connect the negative battery cable.