< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Side Sensor
PartNumber: 25758127
Product Specifications- Notes: Modules And Sensors, Rear
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.1 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Side Sensor
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)
OEM (Genuine) 2008 Buick Enclave Side Sensor
PartNumber: 15271622
Product Specifications- Notes: Enclave, Traverse; Modules And Sensors; Modules And Sensors, Front
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.4 x 2.2 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Side Sensor
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
$62.47 MSRP:$98.25You Save: $35.78 (37%)
FAQ for Air Bag Sensor Repair
Q: What will need to be done before replacing the Roof Side Rail Inflatable Restraint Module?
A:
You will need to disable the SIR system and then remove the headliner assembly.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Inflatable Restraint Roof Side Rail have?
A:
The Inflatable Restraint Roof Side Rail has a total of 11 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Inflatable Restraint Roof Side Rail bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Inflatable Restraint Vehicle Rollover Sensor nuts?
A:
The recommended torque is 10 N.m (88 lb in).
By Bob
GM Specialist
01/11/2022Q: How many nuts does the inflatable restraint vehicle rollover sensor have?
A:
The inflatable restraint vehicle rollover sensor has a total of 3 nuts.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Front Inflatable Restraint Side Impact Sensor?
A:
You will need to disable the supplemental inflatable restraint system, and then remove the front side trim panel and front side door water deflector.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Inflatable Restraint Front End Sensor?
A:
You will need to disable the supplemental inflatable system.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Supplemental Inflatable Restraint Front End Discriminating Sensor have?
A:
The Supplemental Inflatable Restraint Front End Discriminating Sensor has a total of 4 bolts.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Inflatable Restraint Vehicle Rollover Sensor?
A:
You will need to disable the SIR system and then remove the front floor console.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Supplemental Inflatable Restraint Front End Discriminating Sensor bolts?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (13)