< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Buick Enclave Compressor & Condenser Hose
PartNumber: 19356341
Product Specifications- Notes: 2008-2012; Enclave, Traverse
- Item Dimensions: 13.1 x 1.1 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22757062, 22744629, 15926077
- Part Description: 2008 Buick Enclave Compressor & Condenser Hose
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$67.89 MSRP:$128.12You Save: $60.23 (48%)
OEM (Genuine) 2008 Buick Enclave AC Tube
PartNumber: 22875372
Product Specifications- Notes: 2008-2012
- Other Names: AC Tube
- Item Dimensions: 37.4 x 23.1 x 16.3 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10353015, 20821215, 22792489
- Part Description: 2008 Buick Enclave AC Tube
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$180.83 MSRP:$341.19You Save: $160.36 (48%)
OEM (Genuine) 2008 Buick Enclave Front Suction Hose
PartNumber: 20757021
Product Specifications- Notes: 2008-2012; Enclave, Traverse
- Other Names: Compressor Hose, Front Suction Hose, Suction Hose
- Item Dimensions: 18.8 x 13.0 x 9.6 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25958070, 15926078, 25862316
- Part Description: 2008 Buick Enclave Front Suction Hose
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
$201.00 MSRP:$379.26You Save: $178.26 (48%)
OEM (Genuine) 2008 Buick Enclave Outlet Tube
PartNumber: 23169584
Product Specifications- Other Names: Heat Tube, Outlet Hose, Outlet Tube, Tube
- Item Dimensions: 17.7 x 2.7 x 1.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15892074
- Part Description: 2008 Buick Enclave Outlet Tube
Vehicle Fitment- 2008 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
$16.04 MSRP:$30.25You Save: $14.21 (47%)
OEM (Genuine) 2008 Buick Enclave Inlet Tube
PartNumber: 23169583
Product Specifications- Other Names: Heat Tube, Inlet Hose, Inlet Tube, Tube
- Item Dimensions: 17.2 x 3.0 x 1.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15892073
- Part Description: 2008 Buick Enclave Inlet Tube
Vehicle Fitment- 2008 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
$15.96 MSRP:$30.10You Save: $14.14 (47%)
OEM (Genuine) 2008 Buick Enclave Rear Suction Hose
PartNumber: 20821216
Product Specifications- Notes: 2008-2012
- Other Names: Rear Suction Hose, Rear Suction Tube, Suction Hose
- Item Dimensions: 14.7 x 10.7 x 5.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25795291
- Part Description: 2008 Buick Enclave Rear Suction Hose
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$128.43 MSRP:$242.34You Save: $113.91 (48%)
OEM (Genuine) 2008 Buick Enclave Rear AC Tube
PartNumber: 23199274
Product Specifications- Other Names: Rear AC Tube
- Item Dimensions: 83.2 x 22.5 x 12.1 inches
- Item Weight: 9.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20882828, 25892086, 25862086, 15951309
- Part Description: 2008 Buick Enclave Rear AC Tube
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Heater Hose
PartNumber: 25786449
Product Specifications- Notes: Lower
- Other Names: Heater Hose, Water Pipe
- Item Dimensions: 10.6 x 4.4 x 1.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Heater Hose
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Heater Hose
PartNumber: 25786442
Product Specifications- Notes: Upper
- Other Names: Heater Hose, Water Pipe
- Item Dimensions: 12.9 x 2.9 x 1.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Heater Hose
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Hose
PartNumber: 25791601
Product Specifications- Other Names: Hose, Tube
- Item Dimensions: 18.1 x 18.5 x 7.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 23172046
- Part Description: 2008 Buick Enclave Hose
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
FAQ for A/C Hose Repair
Q: How do you install the Discharge Hose?
A:
You need to install new O-rings to the discharge line and the A/C pressure switch, connect the discharge line to the condenser, install the discharge line to the condenser bolt, connect the discharge line to the A/C compressor, install the discharge line bolt to the A/C compressor and front facia, evacuate and recharge the refrigerant system, and then leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the liquid line bracket bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
28/10/2022Q: How do you remove the Suction Hose?
A:
You need to recover the refrigerant, raise and support the vehicle, remove the right front wheelhouse liner, the right front engine splash shield, and the suction hose bracket nut, and remove the bracket and the suction hose/pipe bolt from the A/C compressor., disconnect the suction hose/pipe from the A/C compressor, remove the suction hose/pipe nut from TXV tube, disconnect the suction hose/pipe from the TXV tube, and then remove the suction hose/pipe and the suction hose/pipe O-rings.
By Bob
GM Specialist
28/10/2022Q: How do you install the Auxiliary Air Conditioning Evaporator Tube?
A:
You need to install the auxiliary A/C evaporator tubes to the vehicle, the auxiliary A/C evaporator tubes to the clamps, the heater/A/C tubes retaining nut to the retaining studs and clips along the frame in four places, the auxiliary A/C evaporator tubes to the TXV tube and condenser tube, the retaining nuts, air cleaner duct, the auxiliary A/C evaporator tubes to the HVAC module, retaining nut, auxiliary evaporator tubes to retaining clips and install nuts to secure and the right rear inner wheelhouse liner if necessary, lower the vehicle, recharge the refrigerant to the system, and then leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: How do you install the Suction Hose?
A:
You need to install new O-rings to the suction hose/pipe, connect the suction hose/pipe to the TXV tube, install the suction hose/pipe to the TXV nut, connect the suction hose/pipe to the A/C compressor, install the suction hose/pipe bolt to the A/C compressor, the suction hose/pipe bracket and secure with nut, the right front engine splash shield and the right front wheel house liner, lower the vehicle, evacuate and recharge the refrigerant system, and then leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: How do you remove the Auxiliary Air Conditioning Evaporator Tube?
A:
You need to recover the refrigerant from the system, raise the vehicle, remove the right rear inner wheelhouse liner if necessary, remove the auxiliary evaporator tube nut and pull downward to release the auxiliary A/C evaporator tubes from the auxiliary HVAC module, remove the auxiliary evaporator tube clip nuts and release tubes from clips, remove air cleaner duct, the retaining nuts and the auxiliary A/C evaporator tubes, the heater/A/C tubes retaining nuts, the auxiliary A/C evaporator tubes and the auxiliary A/C evaporator tubes from the vehicle.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the liquid line nut?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the liquid line bracket nuts?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
28/10/2022Q: How do you remove the Discharge Hose?
A:
You need to recover the refrigerant, remove the front facia, the electrical connector from the A/C pressure switch, and the discharge line bolt from the A/C compressor, disconnect the discharge line from the A/C compressor, remove the discharge line to the condenser bolt, disconnect the discharge line from the condenser, and then remove the discharge line, the A/C pressure switch, and the discharge line O-rings.
By Bob
GM Specialist
28/10/2022See more FAQs (4)